Equipment/DrillPress - Revision history

Lpil: Help folks find the pillar drill

2026-04-04T08:20:34Z

Help folks find the pillar drill

← Older revision		Revision as of 08:20, 4 April 2026
Line 17:		Line 17:
	\|template_ver=1.1 <!-- Please do not change. Used for tracking out-of-date templates -->		\|template_ver=1.1 <!-- Please do not change. Used for tracking out-of-date templates -->
	}}		}}

			''You may also be looking for [[Ajax Pillar Drill]]''

	==Status==		==Status==
	'''Works, but is not very precise!'''		'''Works, but is not very precise!'''

Tgreer at 20:17, 23 March 2019

2019-03-23T20:17:39Z

← Older revision		Revision as of 20:17, 23 March 2019
Line 4:		Line 4:
	\|model=Axminster ED16SB<!-- Model -->		\|model=Axminster ED16SB<!-- Model -->
	\|category=Equipment <!-- Main category. Please leave alone to keep item in this category -->		\|category=Equipment <!-- Main category. Please leave alone to keep item in this category -->
	\|subcat=~~Woodworking~~		\|subcat=defunt
	\|status=~~Faulty~~		\|status=Disposed of
	\|consumables=oil, cutting fluid,drive belt<!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->		\|consumables=oil, cutting fluid,drive belt<!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
	\|accessories=Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->		\|accessories=Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->

Sci at 19:27, 2 January 2016

2016-01-02T19:27:43Z

← Older revision		Revision as of 19:27, 2 January 2016
Line 1:		Line 1:
	{{EquipmentInfobox		{{EquipmentInfobox
	\|name=Drill press <!-- Name of the item. -->		\|name=Drill press <!-- Name of the item. -->
	\|image=~~Drill press~~.jpg ~~<!-- Image of the item. Leave with placeholder image if none exists. -->~~		\|image=Axminster ED16SB.jpg
	\|model=Axminster ED16SB<!-- Model -->		\|model=Axminster ED16SB<!-- Model -->
	\|category=Equipment <!-- Main category. Please leave alone to keep item in this category -->		\|category=Equipment <!-- Main category. Please leave alone to keep item in this category -->
	\|subcat=~~Fabrication <!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->~~		\|subcat=Woodworking
	\|status=Faulty		\|status=Faulty
	\|consumables=oil, cutting fluid,drive belt<!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->		\|consumables=oil, cutting fluid,drive belt<!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
Line 13:		Line 13:
	\|owner=LHS<!-- Provide a link to owners members page if other than LHS -->		\|owner=LHS<!-- Provide a link to owners members page if other than LHS -->
	\|origin=Unknown <!-- If via pledge, please link to the completed pledge page on the wiki -->		\|origin=Unknown <!-- If via pledge, please link to the completed pledge page on the wiki -->
	\|location=~~Basement, workshop<!-- Floor, room/zone and location within that area -->~~		\|location=Woodshop
	\|maintainers=sjrapid<!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. -->		\|maintainers=sjrapid<!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. -->
	\|template_ver=1.1 <!-- Please do not change. Used for tracking out-of-date templates -->		\|template_ver=1.1 <!-- Please do not change. Used for tracking out-of-date templates -->

Sci: Correcting non-standard form status entry "working order" to "faulty". "Good working order" sounds inappropriate due to tolerance issues.

2014-02-19T13:38:46Z

Correcting non-standard form status entry "working order" to "faulty". "Good working order" sounds inappropriate due to tolerance issues.

← Older revision		Revision as of 13:38, 19 February 2014
Line 5:		Line 5:
	\|category=Equipment <!-- Main category. Please leave alone to keep item in this category -->		\|category=Equipment <!-- Main category. Please leave alone to keep item in this category -->
	\|subcat=Fabrication <!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->		\|subcat=Fabrication <!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->
	\|status=~~Working order<!-- Set to one of; Good working order,~~ Faulty~~, Out of order, Under construction, Out of consumables, Scrapped, or Unknown -->~~		\|status=Faulty
	\|consumables=oil, cutting fluid,drive belt<!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->		\|consumables=oil, cutting fluid,drive belt<!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
	\|accessories=Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->		\|accessories=Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->

Sjrapid: /* Status */

2013-09-21T11:28:44Z

Status

← Older revision		Revision as of 11:28, 21 September 2013
Line 28:		Line 28:
	[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]		[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]

	There is a [[Pledge:~~_drill_press~~\|pledge]] running to get a new Drill Press for the space.		There is a [[Pledge:_Drill_Press\|pledge]] running to get a new Drill Press for the space.

	The space has an Axminster drill press. The keyless chuck only goes down to 2.7 mm, so for anything smaller you need a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]".		The space has an Axminster drill press. The keyless chuck only goes down to 2.7 mm, so for anything smaller you need a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]".

Sjrapid: /* Status */

2013-09-21T11:26:48Z

Status

← Older revision		Revision as of 11:26, 21 September 2013
Line 28:		Line 28:
	[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]		[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]

	There is a [[~~Drill_Press_Pledge~~\|pledge]] running to get a new Drill Press for the space.		There is a [[Pledge:_drill_press\|pledge]] running to get a new Drill Press for the space.

	The space has an Axminster drill press. The keyless chuck only goes down to 2.7 mm, so for anything smaller you need a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]".		The space has an Axminster drill press. The keyless chuck only goes down to 2.7 mm, so for anything smaller you need a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]".

Sjrapid: /* Status */

2013-09-20T16:28:33Z

Status

← Older revision		Revision as of 16:28, 20 September 2013
Line 30:		Line 30:
	There is a [[Drill_Press_Pledge\|pledge]] running to get a new Drill Press for the space.		There is a [[Drill_Press_Pledge\|pledge]] running to get a new Drill Press for the space.

			The space has an Axminster drill press. The keyless chuck only goes down to 2.7 mm, so for anything smaller you need a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]".

	We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". Russsss found one at the Crystal Palace workshop apparently, but I don't know where it is.		Or you can use the Dremel and mini-mill for high speed / light duty / precision stuff.

	Or you can use the Dremel and mini-mill for high speed / light duty / precision stuff~~, and this one for everything else~~.

	Ideal jobs :		Ideal jobs :

Sjrapid: /* Status */

2013-09-20T16:26:37Z

Status

← Older revision		Revision as of 16:26, 20 September 2013
Line 27:		Line 27:

	[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]		[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]

			There is a [[Drill_Press_Pledge\|pledge]] running to get a new Drill Press for the space.


	We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". Russsss found one at the Crystal Palace workshop apparently, but I don't know where it is.		We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". Russsss found one at the Crystal Palace workshop apparently, but I don't know where it is.

Sjrapid at 18:02, 9 August 2013

2013-08-09T18:02:55Z

← Older revision		Revision as of 18:02, 9 August 2013
Line 22:		Line 22:
	9 Aug 2013 - sjrapid and will took the arbour and chuck off, and tested the quill run out with a dial indicator.		9 Aug 2013 - sjrapid and will took the arbour and chuck off, and tested the quill run out with a dial indicator.

	Quill ~~run out~~ is approximately 0.2mm - should be <=0.~~002mm~~. ~~Chuck runout~~ can be anything up to 10x this depending on selected speed. Your holes may be oval!		Quill runout is approximately 0.2mm (should be <=0.02mm, 1thou) ). Runout at the chuck can be anything up to 10x this depending on selected speed and cutting bit. Your holes may be oval!

	~~We also tested with a new chuck and arbour (certified as 0.0012mm TIR). Runout remains 0.25mm on the new chuck. We didn't bother measuring TIR on the existing keyless chuck.~~		Here's the dial-indicator test video:

	Here's the video:

	[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]		[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]
Line 64:		Line 62:
	#<artag> if there's a screw thread in the end of the taper thrn it can use a drawbar like the 3-in-1 but that's fairly unlikely		#<artag> if there's a screw thread in the end of the taper thrn it can use a drawbar like the 3-in-1 but that's fairly unlikely
	#<lovelace_> K, seems firmly in now		#<lovelace_> K, seems firmly in now
	#9 Aug 2013 - sjrapid and will took the arbour and chuck off, and tested the quill run out with a dial indicator. Also tested with a new certified chuck and arbour (0.0012 TIR). Measured run out of about 0.25mm on the new chuck. TIR not measured on the existing keyless chuck.		#9 Aug 2013 - sjrapid and will took the arbour and chuck off, and tested the quill run out under no load with a dial indicator. Also tested with a new certified chuck and arbour (0.0012 TIR). Measured run out of about 0.25mm on the new chuck. TIR not measured on the existing keyless chuck.

Sjrapid at 17:53, 9 August 2013

2013-08-09T17:53:36Z

← Older revision		Revision as of 17:53, 9 August 2013
Line 28:		Line 28:
	Here's the video:		Here's the video:

	<object type="application/x-shockwave-flash" width="400" height="225" data="http://www.flickr.com/apps/video/stewart.swf?v=109786" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"> <param name="flashvars" value="intl_lang=en-us&photo_secret=6f5305cdcc&photo_id=9469751707"></param> <param name="movie" value="http://www.flickr.com/~~apps/video/stewart.swf?v=109786"><~~/~~param> <param name="bgcolor" value="#000000"></param> <param name="allowFullScreen" value="true"></param><embed type="application/x~~-~~shockwave~~-~~flash" src="http://www.flickr.com~~/~~apps/video/stewart.swf?v=109786" bgcolor="#000000" allowfullscreen="true" flashvars="intl_lang=en-us&photo_secret=6f5305cdcc&photo_id=~~9469751707~~" height="225" width="400"></embed><~~/~~object>~~		[http://www.flickr.com/photos/flux-org-uk/9469751707/ Drill press precision]




	We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". Russsss found one at the Crystal Palace workshop apparently, but I don't know where it is.		We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". Russsss found one at the Crystal Palace workshop apparently, but I don't know where it is.