Equipment/Prologix GPIB-USB controller - Revision history

Sci at 18:29, 29 May 2013

2013-05-29T18:29:16Z

@@ Line 1: / Line 1: @@
 There is a Prologic GPIB to Ethernet adaptor available in the electronics area. It connects a couple of meters to ethernet - and lets one do some automation on capture.
@@ Line 19: / Line 38: @@
 This device is *not* to hack - just to aid your hacking :)
-== current devices
+== current devices ==
   * ADDR 6 -- Programmable Power supply/cycler
@@ Line 25: / Line 44: @@
   * ADDR 9 -- HP3488A Electronic Switch Unit
   * ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter

Sci: Sci moved page GPIB to Equipment/Prologix GPIB-USB controller: Namespace cleanup.

2013-05-29T13:48:25Z

Sci moved page GPIB to Equipment/Prologix GPIB-USB controller: Namespace cleanup.

← Older revision

Revision as of 13:48, 29 May 2013

Sci at 19:40, 28 May 2013

2013-05-28T19:40:11Z

← Older revision		Revision as of 19:40, 28 May 2013
Line 25:		Line 25:
	* ADDR 9 -- HP3488A Electronic Switch Unit		* ADDR 9 -- HP3488A Electronic Switch Unit
	* ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter		* ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter

			[[Category:Equipment]]

Dirkx at 22:20, 10 August 2011

2011-08-10T22:20:31Z

← Older revision		Revision as of 22:20, 10 August 2011
Line 21:		Line 21:
	== current devices		== current devices

	* ADDR 6 -- Programmable Power supply/cycler		* ADDR 6 -- Programmable Power supply/cycler
			* ADDR 7 -- HP8112 Signal generator
	* ADDR 9 -- HP3488A Electronic Switch Unit		* ADDR 9 -- HP3488A Electronic Switch Unit
	* ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter		* ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter

188.28.211.74 at 12:36, 12 May 2011

2011-05-12T12:36:28Z

← Older revision		Revision as of 12:36, 12 May 2011
Line 18:		Line 18:

	This device is not to hack - just to aid your hacking :)		This device is not to hack - just to aid your hacking :)

			== current devices

			* ADDR 6 -- Programmable Power supply/cycler
			* ADDR 9 -- HP3488A Electronic Switch Unit
			* ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter

Dirkx at 23:19, 3 April 2011

2011-04-03T23:19:16Z

← Older revision		Revision as of 23:19, 3 April 2011
Line 1:		Line 1:
	~~== GPIB~~

	There is a Prologic GPIB to Ethernet adaptor available in the electronics area. It connects a couple of meters to ethernet - and lets one do some automation on capture.		There is a Prologic GPIB to Ethernet adaptor available in the electronics area. It connects a couple of meters to ethernet - and lets one do some automation on capture.

Line 18:		Line 16:

	I.e. telnet to the box, talk to GPIB address 10 - ask it to identify itself - and then proceed to measure the voltage (this will by default assume autoranging and adjust the settings as needed).		I.e. telnet to the box, talk to GPIB address 10 - ask it to identify itself - and then proceed to measure the voltage (this will by default assume autoranging and adjust the settings as needed).

			This device is not to hack - just to aid your hacking :)

Dirkx at 23:14, 3 April 2011

2011-04-03T23:14:26Z

← Older revision		Revision as of 23:14, 3 April 2011
Line 1:		Line 1:
	There is a Prologic GPIB to Ethernet adaptor available.		== GPIB

			There is a Prologic GPIB to Ethernet adaptor available in the electronics area. It connects a couple of meters to ethernet - and lets one do some automation on capture.

	* MAC Address: 00:21:69:01:05:57 a		* MAC Address: 00:21:69:01:05:57 a
	* Usually on IP Address 172.31.24.126		* Usually on IP Address 172.31.24.126
	* [[http://prologix.biz/getfile?attachment_id=2\|Documentation]]		* [[http://prologix.biz/getfile?attachment_id=2 Documentation]]
	* Responds to 3040 discovery and telnet to port 1234		* Responds to 3040 discovery and telnet to port 1234

	Typical use session:		Typical use session:

	~~{{{~~telnet 172.31.24.126 1234~~}}}~~		* telnet 172.31.24.126 1234
			* ++addr 10
			* *IDN?
			* HP127812
			* MEASURE:VOLT:DC
			* 12.3912

			I.e. telnet to the box, talk to GPIB address 10 - ask it to identify itself - and then proceed to measure the voltage (this will by default assume autoranging and adjust the settings as needed).

Dirkx: Created page with "There is a Prologic GPIB to Ethernet adaptor available. * MAC Address: 00:21:69:01:05:57 a * Usually on IP Address 172.31.24.126 * [[http://prologix.biz/getfile?attachment_id=2..."

2011-04-03T23:10:03Z

Created page with "There is a Prologic GPIB to Ethernet adaptor available. * MAC Address: 00:21:69:01:05:57 a * Usually on IP Address 172.31.24.126 * [[http://prologix.biz/getfile?attachment_id=2..."

New page

There is a Prologic GPIB to Ethernet adaptor available.

* MAC Address: 00:21:69:01:05:57 a
* Usually on IP Address 172.31.24.126
* [[http://prologix.biz/getfile?attachment_id=2|Documentation]]
* Responds to 3040 discovery and telnet to port 1234

Typical use session:

{{{telnet 172.31.24.126 1234}}}