Toby.m: Page Creation

2024-08-19T07:31:45Z

Page Creation

New page

=Risk Assessment - CNC Routers=

This risk assessment is intended to provide guidance on the risk associated with the above equipment and activities in normal use. Please also check general risk assessments for the space as a whole. Any discrepancies, errors or concerns should be raised with the document maintainers or trustees - do not edit this assessment directly. For responsible persons and last update, see 'version log' of the assessment page.

===Activity===

Cutting wood, metal or suitable plastics on the CNC routers

===Signage===

<gallery mode=nolines widths=200>
Wear Eye Protection.jpg
Wear Ear Protection.jpg
Read Instruction Manual.jpg
Induction Required.jpg
Use Appropriate Guards.jpg
Use Dust Extraction.jpg
No Loose Clothing or Gloves.jpg
</gallery>

===Understanding Risk Rating===

LOW - Ensure current control measures are in place and continue with activity

MED - Control measures may be adequate, co-supervision is recommended

HIGH - Do not undertake activity without further consultation with area specialists

===Risk Assessment===

{| class="wikitable"
|-
! Identify Hazards !! Who May be Harmed and How !! Severity !! Control Measures !! Likelihood !! Risk Rating
|-
| Incompetent user || User, Bystander || HIGH       || Users must not use tools that they are not competent to use. Members must challenge use that they believe is dangerous. Users must read the risk assessment before using a tool. Users must complete induction before use. || LOW     || MED
|-
| Contact with router bit || User || HIGH      || Do not touch moving parts of machine once in use Do not put hands into exclusion zone (within 30cm of router bit). CNC should be switched off immediately after use Spindle should stop within 10 seconds of being turned off. Use guard/ doors if available || LOW     || MED
|-
| Ejection of workpiece (Kickback) || User of the tool, users of the room, the space. || HIGH      || Check that material to be cut is fixed securely to the bed before switching the machine on. Take particular care when working with smaller pieces of material to ensure the material will not move. Use tabs on your design file whenever you are cutting through material completely. || LOW || MED
|-
| Dust (inhalation, fire, explosion) || User of the tool, users of the room, the space. || LOW || A respirator or mask should be used whilst operatingun-enclosed tools for prolonged periods || LOW    || LOW
|-
| Blade snatching or jamming || User of the tool, users of the room, the space. || LOW || Do not exceed the recommended feed and speed settings on the CNC Do not exceed recommended cutting depths Make sure that your material is free from foreign objects. Do not make a cut that exceeds your material depth. || LOW || LOW
|-
| Noise || User of the tool, users of the room. || LOW || Ear protection is advised. || LOW || LOW
|-
| Flying splinters or broken router bit || User of the tool, users of the room. || MED   || Eye protection must be worn whilst using the CNC Eye protection must be worn by all users of the workshop. Do not exceed the recommended feed and speed settings on the CNC Do not exceed recommended cutting depths Make sure that your material is free from foreign objects. Do not make a cut that exceeds your material depth. Close doors on enclosed machines || LOW || LOW
|-
|}

[[Category:Risk Assessment]]

Risk Assessment/ CNC Routers - Revision history

Toby.m: Page Creation