Lulzbot Mini Flexystuder

From London Hackspace Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Lulzbot 2 (Crump)
Hackspace Unknown.png
Model Lulzbot Mini Flexystuder
Sub-category CNC
Status Check the Tools Status Page
Consumables Ninjaflex filament
Accessories Print removal knife, Pritt stick
Training requirement yes
Training link https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
ACnode yes
Owner Hackspace
Origin Donation from Lulzbot
Location 3D printer area, Ground floor
Maintainers tgreer, Welshie

Crump

Crump is a Lulzbot Mini that is normally fitted with a Flexystuder.

While the flexystruder is having problems and we are preparing a replacement aerostruder, it has been fitted with a standard Lulzbot extruder for rigid filament. Ninjaflex can't be used in it at the moment, though this will change when we have the new Aerostruder installed.

Accessible via http://crump from inside the hackspace network.

Filament

Only use the provided filament. Use the correct slicing profile for the filament in use.

Cost

Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.

Training

Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.

Logging

All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Lulzbot_Mini_Flexystuder&oldid=53214’