3D printing Tomu USB enclosure
From London Hackspace Wiki
Revision as of 17:40, 8 January 2018 by
(Created page with "I have 2x: https://tomu.im/
I would like to create an enclosure so it fits nicely into the USB port.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
I have 2x:
I would like to create an enclosure so it fits nicely into the USB port.
Retrieved from ‘
What links here
This page was last modified on 8 January 2018, at 17:40.
Content is available under
Creative Commons Attribution-ShareAlike
unless otherwise noted.
About London Hackspace Wiki