447 Networking POE
Power Over Ethernet
This page documents our usage of POE kit.
Producers
| Name/type | Gigabit? | Ports | Location | Comments |
|---|---|---|---|---|
| PowerDsine 6012 | No | 12 | downstairs kit pile | Has a serial port, don't know how to manage it |
| Phihong POE370U | Yes! | 16 | Quiet room rack | code to manage it here: https://github.com/londonhackspace/phihong , It's connected to booch and can be managed from there. |
| Cisco 3560 | No | 24 | Basement Rack, hostname cisco-poe | |
| Dlink P1012 | No | 12 | downstairs kit pile | Manageable with Ethernet, not setup. |
Phi Hong (Quietroom midspan) ports
For the inputs: a plain number is Equipment/Cisco2, and 3com is the Equipment/3com1. For the outputs a plain number is on the top 2 patch panels (which are numberd 1 to 48), and 3-something is on the bottom patch panel, otherwise it's directly connected without going through a patch panel.
x = not used.
| Input Switch port | Midspan Port | Output Patch Panel port | Notes |
|---|---|---|---|
| 3 | 1 | ap1 | (Quietroom AP) - direct |
| 4 | 2 | 42 | -> classroom ceiling -> ap2 |
| 3com-3 | 3 | Booch | direct |
| x | 4 | x | |
| x | 5 | x | |
| 3com-13 | 6 | 37 | -> perlman/backdoorbot |
| x | 7 | x | |
| 3com-41 | 8 | 41 | -> classroom ceiling -> classroomcam |
| 3com-9 | 9 | 3-9 | ?mainroomcam? |
| x | 10 | x | |
| x | 11 | x | |
| 22 | 12 | 48 | electronics area, why is this poe? (I probably have the wrong port) |
| 44 | 13 | 13 | pillar near shower -> phone on black desks |
| 3com-37 | 14 | 3-12 | by tesla -> tesla phone |
| x | 15 | x | |
| 32 (?) | 16 | 44 | cleaning cupboard, one day we hope to have the PIR's wired up... |
Consumers
currently running
- ap1 and ap2, both upstairs, powered by the Phihong POE370U
- Mainroomcam
- classroomcam
- perlman (backdorbot)
- booch
- many ip phones around the space for Project:VOIP
not yet installed
- Arduino + DMX shield
- acnodes x ?