447 Networking POE
Power Over Ethernet
This page documents our usage of POE kit.
|PowerDsine 6012||No||12||downstairs kit pile||Has a serial port, don't know how to manage it|
|Phihong POE370U||Yes!||16||Quiet room rack||code to manage it here: https://github.com/londonhackspace/phihong , It's connected to booch and can be managed from there.|
|Cisco 3560||No||24||Basement Rack, hostname cisco-poe|
|Dlink P1012||No||12||downstairs kit pile||Manageable with Ethernet, not setup.|
Phi Hong (Quietroom midspan) ports
For the inputs: a plain number is Equipment/Cisco2, and 3com is the Equipment/3com1. For the outputs a plain number is on the top 2 patch panels (which are numberd 1 to 48), and 3-something is on the bottom patch panel, otherwise it's directly connected without going through a patch panel.
x = not used.
|Input Switch port||Midspan Port||Output Patch Panel port||Notes|
|3||1||ap1||(Quietroom AP) - direct|
|4||2||42||-> classroom ceiling -> ap2|
|3com-41||8||41||-> classroom ceiling -> classroomcam|
|22||12||48||electronics area, why is this poe? (I probably have the wrong port)|
|44||13||13||pillar near shower -> phone on black desks|
|3com-37||14||3-12||by tesla -> tesla phone|
|32 (?)||16||44||cleaning cupboard, one day we hope to have the PIR's wired up...|
- ap1 and ap2, both upstairs, powered by the Phihong POE370U
- perlman (backdorbot)
- many ip phones around the space for Project:VOIP
not yet installed
- Arduino + DMX shield
- acnodes x ?