447 Networking POE
Power Over Ethernet
This page documented the use of POE kit at 447 Hackney Road. We have deployed considerably more POE equipment into Ujima House (our 2018 Wembley location) and updated another wiki page accordingly. At 447, we had a creative balance of POE switching and midspans. (Wembley is mostly POE-enabled network switches)
|PowerDsine 6012||No||12||downstairs kit pile||Has a serial port, don't know how to manage it|
|Phihong POE370U||Yes!||16||Quiet room rack||code to manage it here: https://github.com/londonhackspace/phihong , It's connected to booch and can be managed from there.|
|Cisco 3560||No||24||Basement Rack, hostname cisco-poe|
|Dlink P1012||No||12||downstairs kit pile||Manageable with Ethernet, not setup.|
Phi Hong (Quietroom midspan) ports
For the inputs: a plain number is Equipment/Cisco2, and 3com is the Equipment/3com1. For the outputs a plain number is on the top 2 patch panels (which are numberd 1 to 48), and 3-something is on the bottom patch panel, otherwise it's directly connected without going through a patch panel.
x = not used.
|Input Switch port||Midspan Port||Output Patch Panel port||Notes|
|3||1||ap1||(Quietroom AP) - direct|
|4||2||42||-> classroom ceiling -> ap2|
|3com-41||8||41||-> classroom ceiling -> classroomcam|
|22||12||48||electronics area, why is this poe? (I probably have the wrong port)|
|44||13||13||pillar near shower -> phone on black desks|
|3com-37||14||3-12||by tesla -> tesla phone|
|32 (?)||16||44||cleaning cupboard, one day we hope to have the PIR's wired up...|
- ap1 and ap2, both upstairs, powered by the Phihong POE370U
- many ip phones around the space for Project:VOIP
not yet installed
- Arduino + DMX shield
- acnodes x ?