Difference between revisions of "Components"

From London Hackspace Wiki
Jump to: navigation, search
(Requests)
(Requests)
Line 8: Line 8:
 
* VGA to M1-DA Cable for touch table mini projector
 
* VGA to M1-DA Cable for touch table mini projector
 
* NUTS. Various. Metric. (Specifically the M8 thin required to reinforce the makerbot extruder)
 
* NUTS. Various. Metric. (Specifically the M8 thin required to reinforce the makerbot extruder)
* BOLTS to go with nuts, also "machine screws" down to m3 or smaller
+
* BOLTS to go with nuts, also "machine screws" down to m3 or smaller - we now have a selection of M2/2.5/3/4 bolts/nuts/washers [[User:JasperWallace|JasperWallace]]
 
* Header-pin sockets (etc)
 
* Header-pin sockets (etc)
 
* More breadboards (larger)
 
* More breadboards (larger)

Revision as of 17:57, 17 May 2010

The Hackspace carries a range of electronic (and other) components in stock. As a rule, members can use anything for free, as long as the cost is less than £1. However, if you're using more than £5-£10 worth of components a month, we'd appreciate a donation to cover those costs.

Purchasing

If you're a member of the space we'll happily order components for you and take advantage of bulk discounts/free shipping. If the component you request is cheap, we may order more than you need and bring it into stock in the space (if that's the case, then it's free as above).

Requests

  • VGA to M1-DA Cable for touch table mini projector
  • NUTS. Various. Metric. (Specifically the M8 thin required to reinforce the makerbot extruder)
  • BOLTS to go with nuts, also "machine screws" down to m3 or smaller - we now have a selection of M2/2.5/3/4 bolts/nuts/washers JasperWallace
  • Header-pin sockets (etc)
  • More breadboards (larger)
  • Opto-couplers
  • Selection of led's
  • Photo transistors, visible wavelength.. (3-4 for t0m) [1]
  • Small speakers, good for arduino wave shields [2] (get a fair few as they're useful)
  • Solder paste [3]
  • A few freeduino's or similar (We're running short) (Could we do a pcb making + soldering workshop to make a bunch of Nanduino's instead since thats kind of a hackspace project? JasperWallace )
  • 2.5mm jack (plugs and sockets)
  • 16way IDC sockets and headers [4] [5] 5 of each for solexious
  • ATmega1284 40pin DIL [6]
  • Various sizes of Pre-Sensitised Copper-Clad Board's [7]

Tools and equipment

See the Wishlist page.