Difference between revisions of "Components"

From London Hackspace Wiki
Jump to navigation Jump to search
Line 11: Line 11:
 
* BOLTS to go with nuts, also "machine screws" down to m3 or smaller - we now have a selection of M2/2.5/3/4 bolts/nuts/washers [[User:JasperWallace|JasperWallace]]
 
* BOLTS to go with nuts, also "machine screws" down to m3 or smaller - we now have a selection of M2/2.5/3/4 bolts/nuts/washers [[User:JasperWallace|JasperWallace]]
 
* Spade Terminals
 
* Spade Terminals
 +
* LEDs (varying, some good bright ones)
 
* Header-pin sockets (etc)
 
* Header-pin sockets (etc)
 
* A few freeduino's or similar (We're running short)
 
* A few freeduino's or similar (We're running short)

Revision as of 19:04, 20 June 2010

The Hackspace carries a range of electronic (and other) components in stock. As a rule, members can use anything for free, as long as the cost is less than £1. However, if you're using more than £5-£10 worth of components a month, we'd appreciate a donation to cover those costs.

Purchasing

If you're a member of the space we'll happily order components for you and take advantage of bulk discounts/free shipping. If the component you request is cheap, we may order more than you need and bring it into stock in the space (if that's the case, then it's free as above).

Requests

  • More sodium silicate solution. Maplin product page (code AP01B)
  • VGA to M1-DA Cable for touch table mini projector (Do we have this now? --Russ)
  • NUTS. Various. Metric.
  • BOLTS to go with nuts, also "machine screws" down to m3 or smaller - we now have a selection of M2/2.5/3/4 bolts/nuts/washers JasperWallace
  • Spade Terminals
  • LEDs (varying, some good bright ones)
  • Header-pin sockets (etc)
  • A few freeduino's or similar (We're running short)
    • Could we do a PCB-making + soldering workshop to make a bunch of Nanduinos instead since that's a hackspace project? JasperWallace
    • I'm happy to help with making Nanduinos, but unless you really want to DIY, I recommend [Teensy] & [Bumble-B] which are similar. ChrisMc
  • Various sizes of Pre-Sensitised Copper-Clad Board's [1] (Farnell link please --Russ) one of these? JasperWallace Another source
  • Drill bits for a drill. Dremel arent really appropriate
  • 0.33uf Capacitors

Tools and equipment

See the Wishlist page.