Difference between revisions of "Door control system"

From London Hackspace Wiki
Jump to: navigation, search
(Bell software)
Line 92: Line 92:
If a newer version has <hostname> instead, leave that.
If a newer version has <hostname> instead, leave that.
=== Doorbell ===
green & blue = wires from doorbell
button green wire A0
redLED yellow wire A2
greenLED red wire A1

Revision as of 20:45, 26 April 2011


The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at or repair.


We have a Tikitag RFID reader, embedded in the door, which we use to automatically open the door when authenticated.

Doorbot diagram.png


The software runs on Bell, and its code is on Github.

The access list is currently a text file, copied via a script from Bell. The text file simply consists of card ID and name.

The door opener broadcasts on the network whenever the door is opened or the bell is pressed.

There are listeners on Babbage that connect to robonaut to announce on IRC, and flash the lights using Lighted.

The announcement listener uses the GLaDOS voice. You can generate your own name file using this generator and place it into the appropriate directory on Bell. Although you can use that page, a better solution is presented below.

Adding a card

Connect to Bell ( as root. The password is hackspace.

ssh root@bell
root@bell:i~$ screen -dr doorbot

You will see the log of attempted access. Your card number will be at the bottom.

Select your card number and copy it to the clipboard. Press Ctrl+A, Ctrl+D to disconnect.

Add the card manually to the bottom of Doorbot/cardtable.dat with your name after it.

Do not restart the doorbot process. It will automatically detect changes to cardtable.dat.


Please use this with caution. Once unlocked, the door must be physically opened and closed again to relock. If you unlock the door remotely, use the door webcam to check someone has entered the space.

ssh root@bell

If the arduino has somehow changed port, you might need to edit that in openDoor.py

  • If this ambiguity becomes a problem (eg if another serial port is added), update the udev rules : debian distributions create /dev/serial/by-id where the links in that directory include in their names the unique serial number assigned to the FTDI chip on the arduino board.
    • This will happen when I/someone gets around to it :D Ms7821 08:38, 27 August 2010 (UTC)

Logging & maintenance

If you make changes or discover a problem with doorbot, please add it to the logbook.

  • The main script is rundoorbot, which announces to irccat on Babbage if the python script dies.
  • The python script (doorbot.py) announces on successful initialisation.

The service currently runs in screen, to avoid any disk syncing issues. Note that killing the python script with Ctrl+C will be announced. To start or stop doorbot without connecting to screen, use:

/etc/init.d/doorbot start
/etc/init.d/doorbot stop

Glados Voice

There is a guide on Youtube that I've made to show the process as its hard to describe in text: http://www.youtube.com/watch?v=OE8S9knXcW0

The Glados voices were generated by oni following the method found by Tom Wyatt. To create a glados voice one must do the following:

  • Go to ATandT's Text to Speech page. Type in your name and download the file
  • Load up the program Melodyne
  • Select the entire Waveform
  • Using the melodic algorithm, double click on one section of the waveform. I believe this moves the form to its nearest notes.
  • Using the zig Zag looking tool, flatten the pitch.
  • Up the pitch by dragging upwards by 160 or so.
  • Save

Tom and I have looked for a vocoder or similar in Audacity that will do this for you. I'll make a video of this and stick it on YouTube at some point. Believe it or not, it is faster than the website as this is exactly what that website in the links is doing.

I'll see about implementing the processing algorithm in ChucK so it can be a command-line operation the next time I'm prototyping some FFT analysis stuff with it. -- Anthony

Bell software

Bell is a minimal install of Voyage Linux (Debian) with (wifi, iw, wireless) packages removed and the requirements for Doorbot added.

New packages include:

git netcat tcpdump vim screen
python-serial pcscd python-pyscard avrdude gcc-avr
alsa-base alsa-modules-2.6.32-voyage alsa-utils alsa-oss bplay 

This leaves about 25MB free.

The clean install needs the following to be added to /etc/dhcp/dhclient.conf:

send host-name "bell";

If a newer version has <hostname> instead, leave that.


green & blue = wires from doorbell button green wire A0 redLED yellow wire A2 greenLED red wire A1