Equipment/Denning

From London Hackspace Wiki
< Equipment
Revision as of 18:35, 2 January 2016 by Kraptv (talk | contribs) (Denning hardware update and info cleanup)
Jump to: navigation, search
Denning
Hackspace Unknown.png
Model Dell Optiplex 780 SFF 4GB Mem / 320GB SATA HD
Sub-category Systems
Status Good working order
Last updated 8 December 2019 18:20:33
Training requirement yes
Training link Unknown
ACnode no
Owner LHS
Origin Donation
Location Near Back Door
Maintainers Sysadmin team

Denning

Same hardware as Bell (more detailed hardware configuration there)

Running the following services:

  • Non-vital services that used to run on Boole.
  • Local LDAP services replicated from Turing.
  • ZoneMinder CCTV recording from legacy analogue cameras (b/w & colour) - possibly feeding into Bruce (the new ZoneMinder server)

Zoneminder/CCTV

Denning has a full height 8-port PCI video capture card installed to digitise the analogue cameras.

The card is currently connected to the 3 yard cameras and the rear lobby camera. The other 4 inputs are disabled until we put more cameras up.

The card is a BT878 8-chip 8-input full height PCI card similar to the Kodicom 8800

The modprobe.d settings I'm using are:

options i2c-algo-bit bit_test=1 options tuner debug=1 options bttv gbuffers=16 card=102,102,102,102,102,102,102,102 radio=0,0,0,0,0,0,0,0 tuner=4,4,4,4,4,4,4,4 audiodev=-1,-1,-1,-1,-1,-1,-1,-1 v4l2=1 bttv_verbose=1 chroma_agc=1 combfilter=2 full_luma_range=1 coring=1

Each input is configured with:

  • fps: 10
  • alarm fps: 25
  • palette: BGR24
  • resolution: 640 x 480

This might just about work with all 8 inputs, however, we may have to drop the resolution to 360 x 288 - realistically this may never happen as we have been opting to install IP cameras in the space - superior images and no complicated capture cards for image acquisition.

Issues

Currently has only a single mechanical hard drive so vulnerable to data loss. There is space for a second hard drive if we want to mirror the drive.