Equipment/Farnell TSV70
Jump to navigation
Jump to search
| Farnell Power Supply | |
|---|---|
 | |
| Model | TSV70 |
| Sub-category | Test equipment |
| Status | Faulty |
| Accessories | no (needs leads) |
| Training requirement | no |
| ACnode | no |
| Origin | Artag |
| Location | Ground Floor, Electronics area |
Description
A solid linear british-made Farnell power supply for more demanding jobs. 30V 10A / 70V 5A
Status
Broken (Not SO solid, then !).
Apparently blows mains fuses (and also has some damaged fuseholders).
- Actually, it doesn't. At least, not so far. Artag 15.9.14
- Has been given a mains fuse holder (not yet fitted correctly) and mains plug
- Only one output fuseholder present - careful of the dangling wires
- With one output fuse fitted, output goes to maximum with no voltage control
ToDo
- Replace fuseholders (Artag has some ready)
- Fix
- Make side panels (Laser cut acrylic would do nicely)
- Replace front and back panel screws
- Fit new mains lead
- Place in usable location (maybe under the solder oven, on a stand, with nice long thick DC leads added).