Difference between revisions of "Equipment/HP E3631A"

From London Hackspace Wiki
Jump to: navigation, search
m
 
Line 5: Line 5:
 
| category = Equipment <!-- Main category. Please leave alone to keep item in this category -->
 
| category = Equipment <!-- Main category. Please leave alone to keep item in this category -->
 
| subcat = Test equipment<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->
 
| subcat = Test equipment<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->
| status = <!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown -->
+
| status = Good working order<!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown -->
| consumables = Unknown <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
+
| consumables = <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
 
| accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->
 
| accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->
| reqtraining = <!-- Is training required to use this equipment? Yes or no. -->
+
| reqtraining = no<!-- Is training required to use this equipment? Yes or no. -->
| trainlink = Unknown <!-- If training is required, provide a link to training signup or contact page. Otherwise leave blank. -->
+
| trainlink = <!-- If training is required, provide a link to training signup or contact page. Otherwise leave blank. -->
| acnode = <!-- Is the equipment ACnode locked? -->
+
| acnode = no <!-- Is the equipment ACnode locked? -->
| owner = Unknown <!-- Provide a link to owners members page if other than LHS -->
+
| owner = <!-- Provide a link to owners members page if other than LHS -->
| origin = Unknown <!-- If via pledge, please link to the completed pledge page on the wiki -->
+
| origin = Simon Klyne<!-- If via pledge, please link to the completed pledge page on the wiki -->
| location = <!-- Floor, room/zone and location within that area -->
+
| location = Ground Floor, Electronics area<!-- Floor, room/zone and location within that area -->
 
| maintainers = <!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. -->
 
| maintainers = <!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. -->
 
| template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates -->
 
| template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates -->

Latest revision as of 22:22, 29 May 2013

HP Power Supply
HP E3631A PSU.jpg
Model E3631A
Sub-category Test equipment
Status Good working order
Last updated 29 May 2013 22:22:23
Accessories Unknown
Training requirement no
ACnode no
Origin Simon Klyne
Location Ground Floor, Electronics area


The space now has a Hewlett Packard E3631A 80W Triple Output Power Supply, 6V, 5A & ±25V, 1A bench power supply which lives on the soldering bench.

It's programmable over RS232 or GPIB/HPIB ports on the back and there is an extensive manual for it .

Key Features & Specifications

Output Ratings

  • Output 1: 0 to 6 V, 0 to 5 A
  • Output 2: 0 to +25 V, 0 to 1 A
  • Output 3: 0 to -25 V, 0 to 1 A

Programming Accuracy at 25°C ±5°C

  • Voltage: 0.05% + 20 mV, 0.05% + 20 mV, 0.1% + 5 mV
  • Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA

Ripple & Noise (20 Hz to 20 MHz)

  • Normal Mode Voltage: <350 µVrms/ 2 mV p-p, <350 µV rms/2 mV p-p, <350 µV rms/2 mV p-p
  • Normal-mode current: <500 µA rms, <500 µA rms, <2 mA rms
  • Common-mode current: <1.5 µA rms, <1.5 µA rms, <1.5 µA rms

Readback Accuracy at 25°C ±5°C

  • Voltage: 0.05% + 10 mV, 0.05% + 10 mV, 0.1% + 5 mV
  • Current: 0.15% + 4 mA, 0.15% + 4 mA, 0.2% + 10 mA