Difference between revisions of "Equipment/Hitachi VC-6545"
Jump to navigation
Jump to search
m (image) |
m (→Hitachi VC-6545 CRT Storage Oscilloscope: Specs and manual and notes.) |
||
Line 20: | Line 20: | ||
We have two of these. | We have two of these. | ||
+ | |||
+ | Manual is [http://eww.ko4bb.com/getsimple/index.php?id=download&file=06_Misc_Test_Equipment/Hitachi/Hitachi_VC6025_6045_6525_6545_Oscilloscope_Service_Manual.pdf accessible for download here courtesy of amateur radio enthusiast KO4BB.] | ||
+ | |||
+ | Specs: | ||
+ | |||
+ | 40MS/s(1CH), | ||
+ | 20MS/s(2CH simultaneously), | ||
+ | 100MHz Bandwidth, 4kword(1CH), 2kw/CH, | ||
+ | Delayed Sweep, Frequency counter. | ||
+ | |||
+ | '''Features''' | ||
+ | |||
+ | * Modern CRT-based Basic Real-time & Storage Oscilloscope | ||
+ | * Exclusive one-shot and intermittent phenomena are simple to capture using the digital storage function. | ||
+ | * Using the pre-trigger function, it is possible to observe the rising edge of a waveform which occurs before the trigger occurs. | ||
+ | * Non-repeating events can be observed as clean waveform using the digital storage function. | ||
+ | * Low-speed phenomena can be observed as a trace using the digital storage function (roll mode). | ||
+ | * External plotter functionality enables hardcopies of CRT waveform data. | ||
+ | * Averaging can be used to reduce noise, providing summary signal of interest. | ||
+ | * Captured waveform can be saved to internal memory and recalled for comparison. | ||
+ | * RS-232C serial interface usable to transfer stored waveform data. | ||
+ | * Dual cursors can be enabled to make accurate measurements of voltage, time, and frequency. | ||
+ | * After waveform capture, it can be displayed in expanded form with interpolation (linear or sine). | ||
+ | * Using sweep time auto-ranging, the sweep rate setting automatically optimised in accordance with the input signal frequency. | ||
+ | * Trigger lock hold the sum of the hold-off time and sweep time for stable trigger of complex pulse trains. | ||
+ | * Frequency of the channel selected as the trigger signal is automatically counted. |
Revision as of 15:44, 30 December 2018
Hitachi VC-6545 CRT Storage Oscilloscope
We have two of these.
Manual is accessible for download here courtesy of amateur radio enthusiast KO4BB.
Specs:
40MS/s(1CH), 20MS/s(2CH simultaneously), 100MHz Bandwidth, 4kword(1CH), 2kw/CH, Delayed Sweep, Frequency counter.
Features
- Modern CRT-based Basic Real-time & Storage Oscilloscope
- Exclusive one-shot and intermittent phenomena are simple to capture using the digital storage function.
- Using the pre-trigger function, it is possible to observe the rising edge of a waveform which occurs before the trigger occurs.
- Non-repeating events can be observed as clean waveform using the digital storage function.
- Low-speed phenomena can be observed as a trace using the digital storage function (roll mode).
- External plotter functionality enables hardcopies of CRT waveform data.
- Averaging can be used to reduce noise, providing summary signal of interest.
- Captured waveform can be saved to internal memory and recalled for comparison.
- RS-232C serial interface usable to transfer stored waveform data.
- Dual cursors can be enabled to make accurate measurements of voltage, time, and frequency.
- After waveform capture, it can be displayed in expanded form with interpolation (linear or sine).
- Using sweep time auto-ranging, the sweep rate setting automatically optimised in accordance with the input signal frequency.
- Trigger lock hold the sum of the hold-off time and sweep time for stable trigger of complex pulse trains.
- Frequency of the channel selected as the trigger signal is automatically counted.