Difference between revisions of "Equipment/Liebert-GXT2-UPS"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
{{EquipmentInfobox | {{EquipmentInfobox | ||
|name=Liebert GXT2 UPS | |name=Liebert GXT2 UPS | ||
| − | |model=GXT2 | + | |model=UPStation GXT2 |
|category=Equipment | |category=Equipment | ||
|subcat=Networking | |subcat=Networking | ||
| Line 17: | Line 17: | ||
This is the large UPS with the noisy fan next to the rack in the basement. | This is the large UPS with the noisy fan next to the rack in the basement. | ||
| − | It currently provides backup power for boole and the switch downstairs. | + | It currently provides backup power for [[boole]] and the switch downstairs. |
| − | + | Unfortunately it's not supported by the net ups tools, it's serial protocol has been reversed fairly well tho: | |
| + | * http://cgi.csc.liv.ac.uk/~greg/projects/liebertserial/ | ||
| + | * http://lists.alioth.debian.org/pipermail/nut-upsdev/2009-January/003772.html | ||
| + | * http://lists.alioth.debian.org/pipermail/nut-upsdev/2009-January/003775.html | ||
| + | * http://thr3ads.net/nut-upsuser/2008/02/295757-Liebert-UPS-serial-cable-questions | ||
| + | Patching the net ups tools to support our usp would be a good weekend project for someone! | ||
| + | |||
| + | Emerson (who appear to have acquired Liebert at some point) do have Linux tools to talk to it, they work but are a bit strange: | ||
| + | |||
| + | * http://www.emersonnetworkpower.com/en-EMEA/Brands/Liebert/Pages/MultiLinkAutomatedShutdownSoftware.aspx | ||
| + | * http://www.emersonnetworkpower.com/en-US/Brands/Liebert/Pages/Linux_version_2.6.27_or_later_kernel_on_Intel.aspx | ||
== TODO == | == TODO == | ||
| Line 36: | Line 46: | ||
Both the power to the rack upstairs and the important things in the rack downstairs are on the ups. Backdoorbot will be protected from power outages since it if running off of POE. Wifi will work since it runs off of POE. | Both the power to the rack upstairs and the important things in the rack downstairs are on the ups. Backdoorbot will be protected from power outages since it if running off of POE. Wifi will work since it runs off of POE. | ||
| + | |||
| + | [[Category:Projects]] | ||
| + | [[Category:Space_Infrastructure_Projects]] | ||
Revision as of 08:24, 8 June 2013
| Liebert GXT2 UPS | |
|---|---|
| Model | UPStation GXT2 |
| Sub-category | Networking |
| Status | Under construction |
| Consumables | n/a |
| Accessories | Serial Cable |
| Training requirement | yes |
| ACnode | no |
| Owner | LHS |
| Location | Basement rack. |
| Maintainers | Sysadmin team |
Intro
This is the large UPS with the noisy fan next to the rack in the basement.
It currently provides backup power for boole and the switch downstairs.
Unfortunately it's not supported by the net ups tools, it's serial protocol has been reversed fairly well tho:
- http://cgi.csc.liv.ac.uk/~greg/projects/liebertserial/
- http://lists.alioth.debian.org/pipermail/nut-upsdev/2009-January/003772.html
- http://lists.alioth.debian.org/pipermail/nut-upsdev/2009-January/003775.html
- http://thr3ads.net/nut-upsuser/2008/02/295757-Liebert-UPS-serial-cable-questions
Patching the net ups tools to support our usp would be a good weekend project for someone!
Emerson (who appear to have acquired Liebert at some point) do have Linux tools to talk to it, they work but are a bit strange:
- http://www.emersonnetworkpower.com/en-EMEA/Brands/Liebert/Pages/MultiLinkAutomatedShutdownSoftware.aspx
- http://www.emersonnetworkpower.com/en-US/Brands/Liebert/Pages/Linux_version_2.6.27_or_later_kernel_on_Intel.aspx
TODO
- The 2 FTTC modems need to be powered by the ups.
- The power to the rack in the quiet room comes downstairs by the riser to the left of the ground floor fire door to the common area, the power cables should be detached from the main distro panel and feed back to the rack in the basement, there is enough slack for that to happen.
- Need to check that Backdoorbot will all run properly from POE.
- What do we do with frontdoorbot? (If there is a power outage we can't close or open the roller shutter anyway!)
Final setup
Both the power to the rack upstairs and the important things in the rack downstairs are on the ups. Backdoorbot will be protected from power outages since it if running off of POE. Wifi will work since it runs off of POE.