Difference between revisions of "Equipment/MassiveScreen"

Huge projector screen
Model	Unknown
Sub-category	Missing
Consumables	Unknown
Accessories	Unknown
Training link	Unknown
Owner	Unknown
Origin	Unknown

Latest revision as of 18:09, 29 May 2013

Description

Free-standing tripod mount
8ft wide, 10ft high (when fully extended)
Top and bottom height adjustment
Glass bead finish gives about x2.5 brightness

Notes

Please read all of this before you start.

2 or more people facilitates a more successful erection, unless you have previous experience.
When folding this monster away the screen does not fully retract - about a foot will protrude. To fully retract the screen, turn the unit so the screen housing is vertical. This is a very delicate operation and requires 2 people. The screen should now automatically retract the last foot but may need the end of the housing to be gently tapped on the ground.

Instructions

Steps to erect the screen

Open the tripod legs. You may need to rotate the screen housing a little, depending on how it was packed away last;
Rotate the screen housing so it is horizontal if you haven't already done so;
Extend the silver extendible thing that's now hopefully at the top of the vertical then extend the top of the screen to hook onto the silver extendible thing.
Use the top adjuster with the blue doo-hickey to put the top of the screen where you want it to be.
Holding the handle-looking thing, pull the bottom blue doo-hickey thing and adjust where you want the bottom of the screen to be.

To fold the screen away, reverse the above instructions, remembering the note above about retracting the last foot of screen.

Nobody said it was going to be easy.

Location

The screen was last seen: By the racks near the entrance from 23 in 24.

@@ Line 1: / Line 1: @@
-* Freestanding tripod mount
+{{EquipmentInfobox
+| name = Huge projector screen <!-- Name of the item. -->
+| image = Screen1.jpg <!-- Image of the item. Leave with placeholder image if none exists. -->
+| model = Unknown <!-- Model -->
+| category = Equipment <!-- Main category. Please leave alone to keep item in this category -->
+| subcat = Missing<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->
+| status = <!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown -->
+| consumables = Unknown <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
+| accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->
+| reqtraining = <!-- Is training required to use this equipment? Yes or no. -->
+| trainlink = Unknown <!-- If training is required, provide a link to training signup or contact page. Otherwise leave blank. -->
+| acnode = <!-- Is the equipment ACnode locked? -->
+| owner = Unknown <!-- Provide a link to owners members page if other than LHS -->
+| origin = Unknown <!-- If via pledge, please link to the completed pledge page on the wiki -->
+| location = <!-- Floor, room/zone and location within that area -->
+| maintainers = <!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. -->
+| template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates -->
+}}
+==Description==
+* Free-standing tripod mount
 * 8ft wide, 10ft high (when fully extended)
 * Top and bottom height adjustment
 * Glass bead finish gives about x2.5 brightness
-[[File:Screen1.jpg]]
-Notes.
+==Notes==
 Please read all of this before you start.
 * 2 or more people facilitates a more successful erection, unless you have previous experience.
 * When folding this monster away the screen does not fully retract - about a foot will protrude. To fully retract the screen, turn the unit so the screen housing is vertical. ''This is a very delicate operation and requires 2 people''. The screen should now automatically retract the last foot but may need the end of the housing to be gently tapped on the ground.
-Steps to erect the screen: -
+==Instructions==
-. Open the tripod legs. You may need to rotate the screen housing a little, depending on how it was packed away last;
-. Rotate the screen housing so it is horizontal if you haven't already done so;
+===Steps to erect the screen===
-. Extend the silver extendable thing that's now hopfully at the top of the vertical then extend the top of the screen to hook onto the siver extendable thing.
+# Open the tripod legs. You may need to rotate the screen housing a little, depending on how it was packed away last;
-. Use the top adjuster with the blue doo-hickey to put the top of the screen where you want it to be.
+# Rotate the screen housing so it is horizontal if you haven't already done so;
-. ''Holding the handle-looking thing'', pull the bottom blue doo-hickey thing and adjust where you want the bottom of the screen to be.
+# Extend the silver extendible thing that's now hopefully at the top of the vertical then extend the top of the screen to hook onto the silver extendible thing.
+# Use the top adjuster with the blue doo-hickey to put the top of the screen where you want it to be.
+# ''Holding the handle-looking thing'', pull the bottom blue doo-hickey thing and adjust where you want the bottom of the screen to be.
 To fold the screen away, reverse the above instructions, remembering the note above about retracting the last foot of screen.
@@ Line 20: / Line 42: @@
 Nobody said it was going to be easy.
-The screen was last seen: In the SW corner of 24 by the door.
+==Location==
+The screen was last seen: By the racks near the entrance from 23 in 24.