Equipment/Mop

Introduction

Hi guys and girls, thanks for coming.

You've logged on here to read about how to use the "Mrs Mop" mop. You might well have read this message on the side of the mop and thought to yourself "I suppose I should log onto the old wiki and see what all this fuss is about!".

Well, if you read on, you'll find out exactly what the fuss is about and I think you'll be quite pleased with what you read. I might be wrong, but I don't think so. Most people I've asked have been pretty chuffed so... hey ho.

Mop placement

Ford had it wrong. A real hoopy frood always knows where his mop is. A sympathetic infographic nerd helped us put together a couple of visual aids for mop location and placement.

Mop map: Map with mop mark. Most moppers make merry not missing the mop.

This is so you can see what the hook looks like with the mop and without it. In case you were wondering, we put it outside so if the mop is a bit whiffy, it doesn't disturb the otherwise beautifully-scented hackspace working area. It might bother the smokers, but its not as if they care about foul smells.

Mop usage: a guide

First off thanks for coming. It's important that we keep the hackspace tidy so that we can all have a good time. Now, onto mop usage. I'm going to lay out the usage information in numerical steps. The idea here is to start at the lowest number (usually 1), perform the action specified following the number and then advance to the next number. If there is no next number, you've finished mopping and should treat yourself to something from the fridge (providing you have paid the necessary fee into the correctly labelled segment of the box). If you have ever been incarcerated at her Majesty's pleasure you will be familiar with this procedure but please read this anyway as there may be important health and safety considerations specific to the London Hackspace.

This next bit is the numbered list I spoke about in the last paragraph.

1. Sweep the floor (Bilko's top tip)
   It's very important that you first sweep the floor before mopping. The reason for this is simple; I'll give you some time to think about it for yourself. If you can't think of it, read ahead. If you do think of it, make sure you read ahead to ensure that you thought of the right thing.......................... Had a good little ponder there? Good! We sweep the floor to make sure that we don't end up adhering dust and other such dirty specks to the floor with the water that we're going to splash on later (apologies for the spoilers).
2. Find a bucket for the mop.
   We would've got one but Bilko went out to buy the mop and the bucket was £12.50! Who's going to pay £12.50 for a bloody mop bucket. Some people suggest you use a box from the dirty room. To be honest, my personal opinion is just go with your gut - you probably won't do too bad.
3. Fill that bucket with water
   You're going to want to get some H₂O up in here! Please make sure you don't confuse any other colourless liquids you find around the Hackspace with water (e.g. hydrochloric acid or deuterium). Stick some of this awesome liquid in the bucket, and why not chuck in a bit of soap. Ensure that your soap is friendly to the surface you're cleaning and make sure the final solution (nothing to do with homicide; different usage of the word 'solution') is fairly mild in strength.
4. Get Mrs Mop nice and wet
   Dip her luscious white locks in your soapy concoction and make sure she's soaked up as much as she can.
5. Slap the mop on the floor
   You're going to get the floor wet now. I know you probably think that getting the floor wet is a bad thing, but in the name of cleanliness almost anything goes. Spread the water around so it soaks up all the unsweepable dirt. That's basically the crux of this whole mopping ordeal: we're going to make this water dirty and then remove the water, leaving the floor cleaner. Once you've spread the water around, feel free to rub it into the ground a bit to make sure it really soaks up the dirt.
6. Soak up the water
   Dry the mop head. If we'd spent the £12.50 on the bucket, we'd have a cool drying section that you press the mop into. But £12.50 is £12.50 and let's just not go there. Maybe start a pledge or something and we can raise the dough. It's an unnecessary luxury though. You'll need to grab it with your hands and wring it dry for the moment (marigolds are optional... BUT RECOMMENDED ;-)). Once it's dry, fly the mop head around the wet patches until either the floor is completely dry or the mop is completely full. If the former, move onto the next step. If the latter, repeat this step.
7. Is the floor completely clean?
   If so, move on to the next step. If not, choose a new area of dirty floor, empty out your dirty water and go back to step 2. Don't worry champ, you'll get there in the end.
8. Debrief
   Right. You've done it. That was the hard part and now you're pretty much a hero. Let's end it well and we can go and grab a beer. Firstly, bring the mop over to a tap and wash it clean. Dry it with the wringing method I mentioned before and once it's completely dry we can go and hang it up. Put it back where you found it. You know where - that hook outside. Yeah, don't just leave it on the floor. You've done so well with all the tidying, it would be a pity to be so careless right at the end.

Conclusion

Thank you for consulting the mop page. Your journey here is done... for now.

Further reading

• More information for any budding mop enthusiasts
• How mops are made: know your weapon