From London Hackspace Wiki
< Equipment
Revision as of 10:39, 14 November 2013 by Velyks (talk | contribs)
Jump to: navigation, search
Vinyl cutter
Model Unknown
Sub-category Office equipment
Status Good working order
Last updated 17 February 2019 13:02:11
Consumables Unknown
Accessories Unknown
Training requirement Yes
Training link See Hipster
Owner Hipster
Origin Long term loan from Hipster
Maintainers Hipster


DATE TBD (by Hipster) @ only 5 places available (no more), please note your name/nick:

  • 1. Tim_n
  • 2. Billy
  • 3. Marc
  • 4. Necati
  • 5. Joe S



After some time not working on it the vinyl cutter/plotter is now working perfectly in linux.

There are no more signal drops that were happening in windows.

The drivers are on the Whittenstein usb card that is attatched to the machine. DO NOT HACK THE CARD.


download inkscape, move items in the driver folder from USB card into: /home/.config/inkscape/extensions

Run inkscape and should be there under extensions, cutter/plotter.

One thing you have to do though is chmod the USB port:

   sudo chmod 0777 /dev/ttyUSB*

Where * is the USB port number

There is more on the linked website and the readme folder on the USB.

Message hipster or find him for help or any issues that arise.

Regards, Hipster


The vinyl cutter will happily take HPGL piped over serial, what you use to make the HPGL is up to personal preference.

Inkscape can export as HPGL, and has plugins for both Linux/OSX (InkCut) and Windows (Inkscape CAMM-GL) to help fine tune cuts.

Old Vinyl Cutter

The old cutter is in the space but is not functional Equipment/VinylCutterOld