Difference between revisions of "Equipment/Printers"

From London Hackspace Wiki
Jump to navigation Jump to search
m
(1022 not currently in use, minor edits)
Line 6: Line 6:
 
| subcat = Office equipment<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->
 
| subcat = Office equipment<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->
 
| status = Good working order<!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown -->
 
| status = Good working order<!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown -->
| consumables = Unknown <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
+
| consumables = Toner <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. -->
 
| accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->
 
| accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. -->
 
| reqtraining = No<!-- Is training required to use this equipment? Yes or no. -->
 
| reqtraining = No<!-- Is training required to use this equipment? Yes or no. -->
Line 14: Line 14:
 
| origin = Unknown <!-- If via pledge, please link to the completed pledge page on the wiki -->
 
| origin = Unknown <!-- If via pledge, please link to the completed pledge page on the wiki -->
 
| location = Ground floor, main area, beside Lovelace<!-- Floor, room/zone and location within that area -->
 
| location = Ground floor, main area, beside Lovelace<!-- Floor, room/zone and location within that area -->
| maintainers = <!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. -->
+
| maintainers = Sully<!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. -->
 
| template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates -->
 
| template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates -->
 
}}
 
}}
Line 41: Line 41:
 
When setting a printer up manually configure it to connect to a printer over the network to the hostname "caxton" or if necessary the IP address, then if prompted select HP Raw printing, LPD or ipp and then select HP Laserjet 2200 (PCL or Postscript) as the print driver.
 
When setting a printer up manually configure it to connect to a printer over the network to the hostname "caxton" or if necessary the IP address, then if prompted select HP Raw printing, LPD or ipp and then select HP Laserjet 2200 (PCL or Postscript) as the print driver.
  
 +
<!--
 
==HP LaserJet 1022==
 
==HP LaserJet 1022==
  
Line 71: Line 72:
 
*Choose a new network printer and enter "http://babbage:631/printers/Gutenberg"  as the printer URI
 
*Choose a new network printer and enter "http://babbage:631/printers/Gutenberg"  as the printer URI
 
*done
 
*done
 +
-->
  
 
== HP Laserjet Pro CP1025 ==
 
== HP Laserjet Pro CP1025 ==

Revision as of 20:46, 29 May 2013

Printers
Hackspace Unknown.png
Model Unknown
Sub-category Office equipment
Status Good working order
Last updated 31 January 2022 08:51:38
Consumables Toner
Accessories Unknown
Training requirement No
Training link Unknown
ACnode No
Owner Unknown
Origin Unknown
Location Ground floor, main area, beside Lovelace
Maintainers Sully

The Hackspace is currently in posession of several printers. Some work, some are untested.

Working

HP Laserjet 2200D

This is a Black and White duplex printer with its own Jetdirect card and will possibly replace the Laserjet 1022.

  • Replacement toner: 96A
  • Location: Beside the desk with Lovelace.
  • Paper size: A4
  • Type: Black and white laser printer
  • Static IP address allocated via DHCP: 172.31.24.9
  • Status: Working. (any issues contact Sully)
  • Duplex (2 sided) printing - Under installable options on your printer configuration set "Duplex Unit (for 2-sided printing)" to "installed"

Driver: HP Laserjet 2200 driver comes with most operating systems. You can use a PCL or Postscript driver.

It's auto discoverable via mDNS from Mac OS, Windows 7, Linux and various other operating systems.

If you need to set it manually the hostname is caxton and the ip address is 172.31.24.9. It supports HP Raw printing, LPD and IPP via ipp://caxton.lan.hack.rs:631/ipp

When setting a printer up manually configure it to connect to a printer over the network to the hostname "caxton" or if necessary the IP address, then if prompted select HP Raw printing, LPD or ipp and then select HP Laserjet 2200 (PCL or Postscript) as the print driver.


HP Laserjet Pro CP1025

If it doesn't, at least for XP follow the instructions above for the 1022,

but use the URL http://babbage:631/printers/HP_LaserJet_CP1025

Recycling cartridges

Please don't thrown them in the bin, we have now a simple process for this:

- use the already printed postage-paid forms you'll find on the office file shelf, under the sticker called "Recycling forms" (in the main room, on the left of Tesla)

- Use the new toner's box to recycle the old one and stick the postage-paid form on it. Then drop it to the post office

- Alternatively you can print your own forms on HP recycle's site here.

Other Inventory

Other printing equipment goes here.http://www.cups.org/str.php?L2455

Equipment/Selex

We also have many thermel recipt printers.

And a WASP WPL305E barcode printer thing.

Printer fund

Date Amount
2011-09-06 £30
2012-05-25 £20
2012-07-21 £60.24
2/1/13 £52.65
15/1/13 £6.63
1/2/13 £9

Note on babbage

The version of ubuntu we run on babbage has a bug that means it dosn't share printers via dns-sd (aka rendevous, bonjour, mdns), see this:

https://bugs.launchpad.net/ubuntu/+source/cups/+bug/465916

Looks like this works now (?)