From London Hackspace Wiki
< Equipment
Revision as of 20:40, 22 August 2011 by Amx109 (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


Scrollsaw currently not working due to a broken blade. Blade needs to be removed and length measured so that a replacement can be bought. Possible blades identified below




Mind your fingers!


If in doubt then please ask Please only cut thin/small peices of wood or similar soft materials.

Changing the blade

Always observe the safety precautions described below.

Tools required: 5mm allen key, gloves, safety glasses

  1. Disconnect the saw from the mains.
  2. Wear gloves and eye protection at all times - this includes anyone helping or watching.
  3. <need more info>
  4. Using some tape, make a note on the machine of the current blade TPI.
  5. From a safe position, reconnect the power and activate the saw to verify that it is running correctly.



  • Purchasing: