Scrollsaw currently not working due to a broken blade. Blade needs to be removed and length measured so that a replacement can be bought. Possible blades identified below
Mind your fingers!
If in doubt then please ask Please only cut thin/small peices of wood or similar soft materials.
Changing the blade
Always observe the safety precautions described below.
Tools required: 5mm allen key, gloves, safety glasses
- Disconnect the saw from the mains.
- Wear gloves and eye protection at all times - this includes anyone helping or watching.
- <need more info>
- Using some tape, make a note on the machine of the current blade TPI.
- From a safe position, reconnect the power and activate the saw to verify that it is running correctly.