Equipment/Scrollsaw
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Status
Scrollsaw currently not working due to a broken blade. Blade needs to be removed and length measured so that a replacement can be bought. Possible blades identified below
Model
NUTOOL SS16-4 Scroll SAW Serial #: 008445
Instructions
Mind your fingers!
Cutting
If in doubt then please ask Please only cut thin/small peices of wood or similar soft materials.
Changing the blade
Always observe the safety precautions described below.
Tools required: 5mm allen key, gloves, safety glasses
- Disconnect the saw from the mains.
- Wear gloves and eye protection at all times - this includes anyone helping or watching.
- <need more info>
- Using some tape, make a note on the machine of the current blade TPI.
- From a safe position, reconnect the power and activate the saw to verify that it is running correctly.
Tips
Consumables
- Purchasing: