Difference between revisions of "Equipment/Ultimakers"

From London Hackspace Wiki
Jump to: navigation, search
m
m
Line 21: Line 21:
 
|origin=Loan <!-- If via pledge, please link to the completed pledge page on the wiki -->
 
|origin=Loan <!-- If via pledge, please link to the completed pledge page on the wiki -->
 
|location=Robotics Area, basement <!-- Floor, room/zone and location within that area -->
 
|location=Robotics Area, basement <!-- Floor, room/zone and location within that area -->
|maintainers=Rich, Tolland, Chris?, Ian? <!-- If an individual is nominated as managing the upkeep of this item, please list them here. -->
+
|maintainers=Rich, [User:Tolland], Chris?, Ian? <!-- If an individual is nominated as managing the upkeep of this item, please list them here. -->
 
|itemId=<!-- Item ID code if available -->
 
|itemId=<!-- Item ID code if available -->
 
|template_ver=1.0 <!-- Please do not change. Used for tracking out-of-date templates -->
 
|template_ver=1.0 <!-- Please do not change. Used for tracking out-of-date templates -->

Revision as of 16:47, 19 October 2015

There are 2 ultimakers currently on loan from "robots for good" project. They are available for use by members under the acnode system. Given the high cost and delicate nature of this equipment training is available to members who have already been inducted for the lulzbot, or have demonstrable previous experience with Ultimaker 3d print hardware.

Product links

{{#invoke:Template translation|renderTranslatedTemplate|template=Draft/core|1=}}

Ultimakers 1 & 2
Ultimakers.png
Sub-category CNC
Status Good working order
Last updated 3 May 2016 09:08:32
Consumables Printer filament
Training requirement Yes
Training link 3dprinter_training
ACnode yes
Owner Wevolver
Origin Loan
Location Robotics Area, basement
Maintainers

Rich, [User:Tolland], Chris?, Ian?





Property "Maintainers" (as page type) with input value "Rich, [User:Tolland], Chris?, Ian?" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.

Description

ACNode is in operation on the Ultimaker-1, the ultimaker-2 acnode is not yet commissioned. In order for your existing training to be approved on ACNode, you must run through a machine type induction to demonstrate how to use the sdcard with the Ultimaker.

If you have been trained previously and need approved on ACNode, contact the maintainers to be added to the acnode.

Specification & documentation

Ultimaker recommend the use of Cura to slice and manipulate your model for printing. There is no pc associated with the Ultimakers, so you will have to download and install Cura and become familiar with it.

The Ultimakers both print from sdcard, so you will need to have with you a sdcard.

Printing

  • Print speed: 30 mm/s - 300 mm/s
  • Travel speed: 30 mm/s - 300 mm/s
  • Precision: 12.5 / 12.5 / 5 micron
  • Nozzle temperature: 180 - 260 °C
  • Heated bed temperature: 50 - 100 °C

Consumables

  • Use of filament will be covered in the training.

Filament options (3.0mm)

  • ABS (prints at 190-230 DegC, requires heated bed at 100-110 DegC)
  • PLA (biodegradable)

Which Sdcard is compatible?