Fasteners

Fastener stock

Type	Consumable
Status	Operational
Origin	Budgeted
Location	Back of tool board, near pillar drill
Maintainers	Artag

[[image::File:None.pngConsumableOperationalBudgetedBack of tool board, near pillar drill[[maintainers::Artag]]

Where

A set of mini-drawers in the workshop (on the shelves near the pillar drill) [picture needed]

What

Various sizes of metric nuts, screws, washers, capscrews, setscrews.

Restocked 14th November 2012 from Challenge (Europe) Ltd

(note : drawers need labelling)

Size	Description	Length mm	Quantity	Cost per 100 (ex vat)	Cost	Stocks low ?
M3	hex full nut	-	1000	£0.12	£1.44
M3	flat washer	-	1000	£0.105	£1.26
M3	capscrew	10	200	£1.36	£3.27
M3	pan head pozi	6	500	£0.24	£1.44
M3	pan head pozi	10	500	£0.336	£2.02
M3	pan head pozi	20	500	£0.43	£2.28
M3	pan head pozi	40	500	0.95	£5.70
M4	hex full nut	-	1000	£0.21	£2.52
M4	flat washer	-	1000	£0.193	£2.32
M4	capscrew	16	500	£1.36	£8.16
M4	pan head pozi	10	500	£0.56	£3.36
M4	pan head pozi	20	500	£0.896	£5.38
M4	pan head pozi	40	500	£1.748	£10.49
M6	hex full nut	-	250	£0.456	£1.37
M6	flat washer	-	250	£0.384	£1.15
M6	hex head setscrew	20	250	£0.276	£0.83

Fasteners are often misnamed. Asking for the wrong thing will result in disappointment or, in some shops, ridicule.

• A setscrew is threaded all the way to the end and usually has a hexagonal head. It is often wrongly called a bolt.
• A bolt has a smooth portion as well as a threaded portion
• Pozidrive and Philips are both known as cross-head screws and use a '+' shaped screwdriver tip
• Pozidrive are more common and have short radial lines between the main grooves
• A single slot right across the head for use with a common flat-blade screwdriver is called a slotted head
• A full rounded screw top is called a round head
• A shallow round head is called a pan head
• A cylindrical head with an allen / hex key hole is called a cap head screw, cap screw or socket head screw
• A conical head intended to lie flush with the surface is called a countersunk head

How

If you are a member, these may be used for your personal project. Please be excellent and respect other members : if you use more than a few, make a donation to help pay for your usage and email the keeper to ensure supplies are replaced.

We can't hold every possible size but the initial stock is just to get things started. It may be possible to stock additional items. If you think there is a need to extend the range please note it here or in email. Be sensible or you'll be ignored.

Size	Description	Length mm
M3	capscrew	20
M4	capscrew	30

Keep the drawers tidy. If you drop them, put them back correctly. If you take more than you need, return the excess to the correct drawer.

Who

In case of problems, suggestions or other queries contact Artag