Difference between revisions of "Gantry CNC"

From London Hackspace Wiki
Jump to: navigation, search
Line 38: Line 38:
 
* To start the spindle, press the green button on the VFD. Use the up and down keys to vary the speed.
 
* To start the spindle, press the green button on the VFD. Use the up and down keys to vary the speed.
  
== Gnerating g-code from your designs ==
+
== Generating g-code from your designs ==
  
There are a lot of different options for preparing a g-code file which can be loaded onto the CNC to cut a design. Some examples of free software include;
+
There are a lot of different options for preparing a g-code file which can be loaded onto the CNC to cut a design. Some examples include;
  
 
2D Packages
 
2D Packages
* MakerCam (Free) http://www.makercam.com/makercam.swf
+
* MakerCam (Free, runs in a browser via Flash) http://www.makercam.com/makercam.swf
 
* Cambam (LHS has a license, installed on the Robotics laptop) http://www.cambam.info/
 
* Cambam (LHS has a license, installed on the Robotics laptop) http://www.cambam.info/
  
 
3D Packages
 
3D Packages
* Autodesk Fusion 360 (Free for non-commercial use, Windows / OSX) http://www.autodesk.co.uk/products/fusion-360/overview
+
* Autodesk Fusion 360 (Free for hobbyists and students, Windows / OSX) http://www.autodesk.co.uk/products/fusion-360/overview
  
When using Fusion 360, in order to post to the Hackspace CNC machines, the Generic EMC2 post-processor should be selected when finally saving the g-code file. LinuxCNC recognises the "ngc" file extension although any extension can be used.
+
When using Fusion 360, in order to post to the Hackspace CNC machines, the "Generic EMC2" post-processor should be selected when finally saving the g-code file. LinuxCNC recognises the "ngc" file extension although any extension can be used.

Revision as of 16:18, 18 October 2015

Gantry CNC
GantryCNC.jpg
Model LHS Design
Sub-category CNC
Status Under construction
Last updated 21 January 2019 11:53:22
Consumables Router / Milling Cutters, material to cut
Accessories NA
Training requirement Yes
ACnode Yes
Owner LHS (spindle and VFD currently on loan) (Frame Dean)
Origin LHS Built
Location Basement,
Maintainers CNC Team, Robotics, Metalbashers,

Summary

This system can cut 2d and 3d shapes from materials such as wood, plastic, metal and composites. Useful for cutting things that can't be cut in the laser cutter. We made this CNC from the UCL donated linear slides and stages, and other things lying around the space, and some bits and pieces that members had. Any suggestions for improvements / modification are welcome.

Specs

  • Spindle 1750 to 17500rpm
  • Rapid traverse rate at 100% 2000mm/min
  • Axis travel
    • X(cross) 850mm
    • Y(longitudinal) 960mm
    • Z(vertical) 80mm (Phase 1), 200mm (Phase 2)

Technical

The system currently runs LinuxCNC on the PC built into the base.

Using the system

  • The spindle is currently fitted with an ER20 collet chuck and can take cutters up to 13mm diameter. Collets can be found on top of the Boxford CNC.
  • To start the spindle, press the green button on the VFD. Use the up and down keys to vary the speed.

Generating g-code from your designs

There are a lot of different options for preparing a g-code file which can be loaded onto the CNC to cut a design. Some examples include;

2D Packages

3D Packages

When using Fusion 360, in order to post to the Hackspace CNC machines, the "Generic EMC2" post-processor should be selected when finally saving the g-code file. LinuxCNC recognises the "ngc" file extension although any extension can be used.