Difference between revisions of "LED tiles"

From London Hackspace Wiki
Jump to navigation Jump to search
m (Added my name to Tiles for members)
Line 25: Line 25:
* 1. Lee Jones  (2 if possible please).
* 1. Lee Jones  (2 if possible please).
* 2.
* 2. Martin Goodman (2 please)
* 3.
* 3.

Revision as of 11:27, 10 January 2016

LED screen tiles donated by Mistamud. See mailing list thread here.

LED tile

What is it

  • Frame containing 6 LED tiles

LED Frame.jpg

  • Controller/PSU "Infiled"


  • 46 individual LED tiles

What are we doing with it?

The space is likely to keep the frame and controller/PSU, and maybe a few extra screens depending on final decision.

Project maintainers

Please add your name here

Tiles for members

The space keeps the frame and controller, plus possibly a few extra screens (decision tbc), which would leave about 40 for members. Register you interest below with name and contact so we can notify you when tiles are ready to collect.

  • 1. Lee Jones (2 if possible please).
  • 2. Martin Goodman (2 please)
  • 3.


LED Specs

The 'tile' contains the matrix of SMDs and the driver ICs and multiplexing to run but you'll need 5v dc and some kind of Pi / Arduino / Nova or Linsn Scancard to control them.

Back of the tile LED-pinout.jpg

Rough Specs sent by Tom:

LEDs Per Pixel 1R1G1B

Red Wavelength (Dominant) 625 ~ 630

Green Wavelength (Dominant) 520 ~ 525 Blue Wavelenghth (Dominant) 470 ~ 475 PIXELS Pixel Confi guration SMD 3528 LED Type Black Diamond LEDs Per Area LEDs/m2 67,635 Physical Pixel Pitch mm 6.66

Physical Pixels Per Area pixels/m2 22,545 Panel:

LED Tile Width mm 320 LED Tile Height mm 120 Viewing Angle – Horizontal degrees 140 Viewing Angle - Vertical degrees 120

Frame and controller/PSU specs

- Frame containing 6 LED tiles - Controller/PSU "Infiled"

This is a link to the manufacturers page here: http://www.infiled.com/chanpin/yingyong-3/20131223/250.html

Also a PDF: http://www.infiled.com/uploads/soft/L%20RSS.pdf

Building a LED wall

On this Mistamud says: You'll need a card called a Scancard. (the brains found inside each and every LED panel): http://www.led-card.com/product_info.php?cPath=24&products_id=314

The signal that goes into the Scancard on Cat5 cable needs to come from a Sender Card: http://www.led-card.com/product_info.php?cPath=23&products_id=15. The signal that goes into a Sender card is good ol' DVI from your laptop.