Difference between revisions of "Laser Cutter/Lesson Notes"
(Created page with "Lasercutter lesson notes Welcome turn on first to start cooling of tube etc check fan is working check main pump is working check coolbot is working don't let the cutter go over...") |
m (Asoko moved page Lasercutter/Lesson Notes to Laser Cutter/Lesson Notes without leaving a redirect) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 47: | Line 47: | ||
what to do if it goes wrong | what to do if it goes wrong | ||
email the list if problems | email the list if problems | ||
| + | |||
| + | [[Category:Guides]] | ||
Latest revision as of 20:58, 20 May 2013
Lasercutter lesson notes
Welcome turn on first to start cooling of tube etc check fan is working check main pump is working check coolbot is working don't let the cutter go over 25 deg
turn on pc under desk open lasercutter soft files over usb or network import file rudementory drawing tools putting lines on layers (and how to do it from cad first)
H+O on engrave line engrave cut
show setting sheet
show use of "unite lines" and how lines must be closed to work with engrave settings
show how to correctly set bed height remind about c02
start job
during: don't leave the cutter show use of pause button what to do if there is a fire
press big red button and use c02 mail list don't use more
use log book pay for usage
when finished the cutter beeps and you can remove your work
what materials you can use, use our offcuts. dont use pvc or try to cut metal test for clorine
good places to get materials what to do if it goes wrong email the list if problems