Lulzbot Mini

From London Hackspace Wiki
Revision as of 13:43, 18 January 2017 by CDave (talk | contribs) (Created equipment page.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Lulzbot 1 (Hull)
Hackspace Unknown.png
Model Lulzbot Mini Standard Extruder
Sub-category CNC
Status Good working order
Last updated 1 August 2019 15:03:56
Consumables XT filament
Accessories Print removal knife
Training requirement yes
Training link
ACnode yes
Owner Hackspace
Origin Donation from Lulzbot
Location 3D printer area, Ground floor
Maintainers cptPrime (Timour), tgreer (Thomas), James N


Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network. Login with user: hull and password: hull.


Only use the provided XT filament.

Hull will theoretically print the follow filaments:

  • -PLA-
  • -ABS-
  • XT
  • -Nylon-

please consult the maintainers if you with to use your own filaments.


Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.


Training is required. There is a cost of £5 to be trained, payable to the trainer.


All prints are to be logged via :