Lulzbot Mini

From London Hackspace Wiki
Revision as of 14:19, 18 January 2017 by CDave (talk | contribs) (Added link to Octoprint page)
Jump to: navigation, search
Lulzbot 1 (Hull)
Hackspace Unknown.png
Model Lulzbot Mini Standard Extruder
Sub-category CNC
Status Good working order
Last updated 1 August 2019 15:03:56
Consumables XT filament
Accessories Print removal knife
Training requirement yes
Training link
ACnode yes
Owner Hackspace
Origin Donation from Lulzbot
Location 3D printer area, Ground floor
Maintainers cptPrime (Timour), tgreer (Thomas), James N


Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.


Only use the provided XT filament.

Hull will theoretically print the follow filaments:

  • PLA
  • ABS
  • XT
  • Nylon

please contact the maintainers if you wish to use a filament that is not available.


Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.


Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.


All prints are to be logged via :