Difference between revisions of "Lulzbot Mini"

From London Hackspace Wiki
Jump to: navigation, search
(cleaning the bed)
Line 14: Line 14:
|origin=Donation from Lulzbot
|origin=Donation from Lulzbot
|location=3D printer area, Ground floor
|location=3D printer area, Ground floor
|maintainers=cptPrime (Timour), tgreer (Thomas), James N
|maintainers=tgreer, Welshie
=== Hull ===
=== Hull ===

Revision as of 12:22, 21 January 2019

Lulzbot 1 (Hull)
Hackspace Unknown.png
Model Lulzbot Mini Standard Extruder
Sub-category CNC
Status Check the Tools Status Page
Last updated 1 August 2019 15:03:56
Consumables XT filament
Accessories Print removal knife
Training requirement yes
Training link https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
ACnode yes
Owner Hackspace
Origin Donation from Lulzbot
Location 3D printer area, Ground floor
Maintainers tgreer, Welshie


Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.


Only use the provided XT filament.

Hull will theoretically print the follow filaments:

  • PLA
  • ABS
  • XT
  • Nylon

please contact the maintainers if you wish to use a filament that is not available.

There is no need to use Pritt Stick, or other adhesive, to get the print to adhere to the bed with rigid filament. Applying excessive Pritt Stick merely cakes the bed in gunk, making the first few layers of your print look messy and lumpy. If you find the bed like this, it can be cleaned off with a warm soapy sponge.


Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.


Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.


All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1