Lulzbot Mini Flexystuder

From London Hackspace Wiki
Revision as of 13:43, 18 January 2017 by CDave (talk | contribs) (Created equipment page.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Lulzbot 2 (Crump)
Hackspace Unknown.png
Model Lulzbot Mini Flexystuder
Sub-category CNC
Status Good working order
Last updated 11 August 2019 13:44:15
Consumables Ninjaflex filament
Accessories Print removal knife, Pritt stick
Training requirement yes
Training link
ACnode yes
Owner Hackspace
Origin Donation from Lulzbot
Location 3D printer area, Ground floor
Maintainers cptPrime (Timour), tgreer (Thomas), James N


Crump is a Lulzbot Mini Flexystuder.
Accessible via http://crump from inside the hackspace network. Login with user: crump and password: crump.


Only use the provided Ninjaflex filament.

please consult the maintainers if you with to use your own filaments.


Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.


Training is required. There is a cost of £5 to be trained, payable to the trainer.


All prints are to be logged via :