Pledge: Collet Chuck
Revision as of 09:03, 5 June 2019 by Deanforbes (talk | contribs)
We are looking at purchasing a collet chuck and backing plate for the space. Pledge opened: 01.06.2019
Pledge leader: deanforbes
The item
The lathe is great but it is really not possible to work on smaller bits safely or accurately the new collet chuck will enable us to work on material between 1 and 20 mm safely or accurately
- lathe chuck and backplate
- https://www.arceurotrade.co.uk/Catalogue/Collets/ER-Lathe-Collet-Chucks/ER32-Lathe-Collet-Chucks
- https://www.chronos.ltd.uk/cgi-bin/sh000001.pl?WD=backplate%20lathe%20d1-4%20chuck&PN=Camlock-Type-Backplates%2ehtml#a41125D14
Budget estimation
- Backplate £41.22 Inc.VAT
- Chuck £59.90 Inc.VAT
Specification
- D1-4 backplate and ER32 Collet Chuck
Pledges
- £10 -- Des
Payment
Please pay in your pledges into the hackspace(viewable on the donation page) account and make sure to use the reference Collet_Chuck, once paid please mark them as PAID on this page .
Running total: £10
Approximate target: £100