Pledge: PCB Etch Tank

From London Hackspace Wiki
Revision as of 12:46, 17 March 2011 by Artag (talk | contribs) (Plans)
Jump to: navigation, search
Etch station

PCB production had been growing at the last space, lets get more tools for it!

Current Status

We won a semi-industrial PCB etching station! Mark put in the winning bid of £95, but total cost is ~£135 (due to fees etc). Artag is going to collect it and will hopefully arrive at the space on Friday.

Excess funds from the pledge are going to be used for consumables and replacement parts to fix it up.


Pay with payment ref: 'PCBETCH'

Paid £225

Running total: £250

Removed pledges

  • £50 --t0m 00:54, 19 July 2010 (UTC)


The bench should be usable in the simplest form as soon as we've checked it out, but there are some things we can do to make the best of it. There's a need for a handful of plumbing and electrical accessories.

  • Since it's already stained there's no problem in putting ferric chloride in it if we have some available (it needs 5 litres but 3 or 4 would do).
  • We can use a spare tank to start brewing the cupric chloride if we want to do that
  • I (artag) have some of Mega's good developer I can use to set up a development tank
  • I have some date-expired mask stripper we can try in a strip tank

  • We need water and waste connections for the rinse tanks. These are simple washing machine fittings but we may need adapters for the supply pipework and a waste hose. I do have some plumbing fittings but we may need more.
  • Where do we put it ? I suggested replacing the unit 23 sink, but short-term it could simply go next to it. Tools may need moving, though. Or it could be installed in the unit 23 toilet. Or it could be integrated into a darkroom build. Discuss ..
  • It would be nice to have power without using the extension lead. The existing ring main might be extended fairly easily to put sockets on the wall near the sink.