Difference between revisions of "Pledge: Shapeoko 2 - desktop CNC full kit"

From London Hackspace Wiki
Jump to navigation Jump to search
m
 
(35 intermediate revisions by 19 users not shown)
Line 8: Line 8:
 
==The item==
 
==The item==
 
The [https://www.inventables.com/technologies/desktop-cnc-mill-kits-shapeoko-2 Shapeoko 2] is a simple, low cost, open source CNC milling machine kits that can be built over a weekend. This is version 2 of the fastest selling CNC machine in the history of the world. There is also further information about the machine, kits, kit contents and other things on this [http://blog.inventables.com/2013/10/shapeoko-2-now-available-for-preorder.html Inventables blog post]. The machine as a whole is accurate but needs a good motor/chuck for the flexibility of what cutters can be used.  
 
The [https://www.inventables.com/technologies/desktop-cnc-mill-kits-shapeoko-2 Shapeoko 2] is a simple, low cost, open source CNC milling machine kits that can be built over a weekend. This is version 2 of the fastest selling CNC machine in the history of the world. There is also further information about the machine, kits, kit contents and other things on this [http://blog.inventables.com/2013/10/shapeoko-2-now-available-for-preorder.html Inventables blog post]. The machine as a whole is accurate but needs a good motor/chuck for the flexibility of what cutters can be used.  
 +
 +
==Uses==
 +
*Precision carving wood, plastic, and/or soft metal
 +
*CNC PCB drilling
 +
*CNC PCB milling (no etching PCB)
  
 
=== Discussion ===
 
=== Discussion ===
Line 35: Line 40:
 
|-
 
|-
 
|NEMA17 stepper motors x 4
 
|NEMA17 stepper motors x 4
−
|[http://store.amberspyglass.co.uk/48mm-nema17-stepper-motor-200step-per-rev.html Amber Spyglass]
+
|Donated by Steve Todd
−
|£62
+
|
−
|-
 
−
|Arduino Uno
 
−
|[http://store.amberspyglass.co.uk/arduino-uno-r3-with-optional-grbl.html Amber Spyglass]
 
−
|£17.25
 
−
|-
 
−
|GAUPS Stepper shield
 
−
|[http://store.amberspyglass.co.uk/gaups-1-0-arduino-compatible-stepper-shield-kit.html Amber Spyglass]
 
−
|£19.95
 
−
|-
 
−
|Stepper driver (A4988 green) x 4
 
−
|[http://store.amberspyglass.co.uk/pololu-a4988-stepper-driver-carrier-board-green.html Amber Spyglass]
 
−
|£40
 
 
|-
 
|-
 
|Delivery
 
|Delivery
 
|
 
|
 
|~£9
 
|~£9
 +
|-
 +
|RAMPS electronics
 +
|[http://www.ebay.co.uk/itm/SINTRON-NEW-3D-Printer-kit-Mega-2560-RAMPS-1-4-5X-A4988-For-Arduino-RepRap-/161276675283?pt=UK_Computing_Other_Computing_Networking&hash=item258cd6c4d3 eBay]
 +
|£40
 
|-
 
|-
 
|Sub-total
 
|Sub-total
 
|
 
|
−
|£417
+
|£317
 
|}
 
|}
  
Line 65: Line 62:
 
These are recommended on the Shapeoko forums. Please vote for your preferred option.
 
These are recommended on the Shapeoko forums. Please vote for your preferred option.
  
−
* [http://www.ebay.co.uk/itm/Proxxon-Precision-drill-grinder-FBS-240-E-/330526698553 Proxxon FBS 240] £52
+
* [http://www.ebay.co.uk/itm/Proxxon-Precision-drill-grinder-FBS-240-E-/330526698553 Proxxon FBS 240] £52 +1 for accurate PCB drilling
 
* [http://www.ebay.co.uk/itm/Makita-RT0700CX4-Router-Laminate-Trimmer-with-Trimmer-Guide-110V-/161002381945?_trksid=p2054897.l4275 Makita RT0700CX4] £106
 
* [http://www.ebay.co.uk/itm/Makita-RT0700CX4-Router-Laminate-Trimmer-with-Trimmer-Guide-110V-/161002381945?_trksid=p2054897.l4275 Makita RT0700CX4] £106
 
* [http://www.toolbox.co.uk/dremel-4000-multi-tool-4000145-3378-103830 Dremel 4000] £83
 
* [http://www.toolbox.co.uk/dremel-4000-multi-tool-4000145-3378-103830 Dremel 4000] £83
Line 72: Line 69:
 
* [http://www.ebay.co.uk/itm/BOSCH-POF-1400ACE-ROUTER-1400W-SOFT-GRIP-DUST-EXTRACTION-/201071135191 Bosch 500A] £99
 
* [http://www.ebay.co.uk/itm/BOSCH-POF-1400ACE-ROUTER-1400W-SOFT-GRIP-DUST-EXTRACTION-/201071135191 Bosch 500A] £99
 
* [http://www.ebay.co.uk/itm/Kress-110v-800-FME-Milling-Grinding-Spindle-CNC-Router-110-volt-/221341154601?_trksid=p2054897.l4275 Kress 800 110V] £166
 
* [http://www.ebay.co.uk/itm/Kress-110v-800-FME-Milling-Grinding-Spindle-CNC-Router-110-volt-/221341154601?_trksid=p2054897.l4275 Kress 800 110V] £166
 +
*[http://www.wolfgangengineering.com/Spindle.php WOLFGANG ENGINEERING WW 650] $250 +1 (very accurate for PCB isolation routing)
  
 
=== Extras ===
 
=== Extras ===
Line 79: Line 77:
 
* cutting/drilling/grinding bits - someone please suggest specific ones/sets
 
* cutting/drilling/grinding bits - someone please suggest specific ones/sets
 
* dust collection/extraction
 
* dust collection/extraction
 +
* drag knife for paper cutting?
  
 
===Additional information===
 
===Additional information===
Line 86: Line 85:
  
 
==Pledges==
 
==Pledges==
 +
Approximate target: '''£475'''
 +
 +
Target reached! Please pay your pledge amount into the Hackspace account with ref '''SHAPEOKO''' then add ''"paid"'' next to your name below.
  
−
* £20 - [[User:Thumper|Ian Henderson]]
+
*<s> £20 - [[User:Thumper|Ian Henderson]]</s> '''paid'''
−
* £10 - [[User:Rob Kam|Rob Kam]]  
+
*<s> £20 - [[User:Rob Kam|Rob Kam]]</s> '''paid'''
−
* £20 - [[User:CDave|Dave Mansfield]]  
+
*<s> £20 - [[User:CDave|Dave Mansfield]]</s> '''paid''' 
−
* £20 - [[User:Cdcooperuk|Colin Cooper]]   
+
*<s> £20 - [[User:Cdcooperuk|Colin Cooper]]</s> '''paid'''  
 +
*<s> £25 - [[User:Bmsleight|Brendan Sleight]]</s> '''paid'''
 +
*<s> £10 - [[Ai3x|Alex Beckett]]  </s> '''paid'''
 +
*<s> £100 - [[User:Saif_Bunni|Saif Bunni]]</s> '''paid'''
 +
*<s> £20 - [[User:Bit32|Si]]</s> '''paid'''
 +
*<s> £20 - [[User:Tamlyn|Tamlyn]]</s> '''paid'''
 +
*<s> £60 - [[User:Orls|Owen Smith]]</s> '''paid'''
 +
*<s> £20 - Adrian Godwin</s> '''paid'''
 +
*<s> £20 - Tom Hodder</s> '''paid'''
 +
*<s> £40 - [[User:Vladimir|Vladimir]]</s> '''paid''' <!-- confirmed by Russ -->
 +
*<s> £40 - [[User:Relopes|Renato Lopes]]</s> '''paid'''
 +
*<s> £10 - [[User:MartinLee|Martin Lee]] </s> '''paid'''
 +
*<s> £30 - [[User:Oly|Oliver Marks]] </s> '''paid'''
 +
*<s> £10 - [[User:Detonate|Det]]  </s> '''paid'''
 +
*<s> £20 - [[User:JonRussell|Jon Russell]] </s> '''paid'''
 
* £20 - [[User:Deanforbes|Dean Forbes]]  
 
* £20 - [[User:Deanforbes|Dean Forbes]]  
−
* £25 - [[User:Bmsleight|Brendan Sleight]]
 
−
* £10 - [[Ai3x|Alex Beckett]]
 
−
* £100 - [[User:Saif_Bunni|Saif Bunni]]
 
−
* £20 - [[User:JonRussell|Jon Russell]]
 
−
* £40 - [[User:Vladimir|Vladimir]] (sent 20140306)
 
−
* £40 - [[User:Relopes|Renato Lopes]]
 
 
* £60 - [[User:Jmebartlett|James Bartlett]]  
 
* £60 - [[User:Jmebartlett|James Bartlett]]  
 
* £20 - [[User:Virtualsue|Sue Spence]]
 
* £20 - [[User:Virtualsue|Sue Spence]]
−
* £10 - [[User:Detonate|Det]] 
 
 
* £10 - [[User:Glyn|Glyn]]   
 
* £10 - [[User:Glyn|Glyn]]   
−
* £20 - [[User:Bit32|Si]] 
 
−
* £10 - [[User:MartinLee|Martin Lee]]
 
−
* £20 - [[User:Tamlyn|Tamlyn]] paid
 
−
 
−
Running total confirmed: '''£475'''
 
−
 
−
Approximate target: '''£475'''
 
  
−
Target reached! Please pay your pledge amount into the Hackspace account with ref '''SHAPEOKO''' then add ''"paid"'' next to your name above.
+
Running total pledged: '''£585'''
  
 +
Total paid: '''£505'''
 
===Unconfirmed pledges===
 
===Unconfirmed pledges===
  
Line 117: Line 120:
 
* £20 - Chris Wilkinson
 
* £20 - Chris Wilkinson
 
* £20 - Antaeus Wheatley
 
* £20 - Antaeus Wheatley
−
* £20 - Tom Hodder
 
 
* £20 - David Walters
 
* £20 - David Walters
−
* £20 - Adrian Godwin
 
  
 
==See also==
 
==See also==
 
*[[Pledge: CNC Mill]]
 
*[[Pledge: CNC Mill]]
 
*[[Pledge: Lathe Milling Machine Combo]]
 
*[[Pledge: Lathe Milling Machine Combo]]
 +
*[[Equipment/CNC Mill]]
 +
*[[Equipment/Dahlgren Wizzard 2000 ST]]
  
 
[[Category:Pledges]]
 
[[Category:Pledges]]

Latest revision as of 13:57, 5 August 2014

Inventables Shapeoko v2

We are looking at purchasing a Shapeoko v2 for the space from MakerSlide. Pledge opened: 26 October 2013

Pledge leader: Tamlyn

The item

The Shapeoko 2 is a simple, low cost, open source CNC milling machine kits that can be built over a weekend. This is version 2 of the fastest selling CNC machine in the history of the world. There is also further information about the machine, kits, kit contents and other things on this Inventables blog post. The machine as a whole is accurate but needs a good motor/chuck for the flexibility of what cutters can be used.

Uses

  • Precision carving wood, plastic, and/or soft metal
  • CNC PCB drilling
  • CNC PCB milling (no etching PCB)

Discussion

See this thread on London Hackspace mailing list.

Parts and prices

This table lists the parts necessary to more-or-less replicate the Shapeoko 2 configuration.

Part Source Price
eShapeoko Mechanical Kit (500x500mm) Amber Spyglass £237.50
Dual X axis upgrade Amber Spyglass £24
Aluminium spacers upgrade Amber Spyglass £6.50
NEMA17 stepper motors x 4 Donated by Steve Todd
Delivery ~£9
RAMPS electronics eBay £40
Sub-total £317

If anyone is able to donate any of the above items, please update the table with your name as the source. If you know of a significantly cheaper source, please update the table too. If it's for the sake of a few pence, I suggest getting it from Amber Spyglass as the guy deserves our support.

Rotary tool options

These are recommended on the Shapeoko forums. Please vote for your preferred option.

Extras

  • PSU - would an old laptop supply work?
  • cabling
  • cutting/drilling/grinding bits - someone please suggest specific ones/sets
  • dust collection/extraction
  • drag knife for paper cutting?

Additional information

Pledges

Approximate target: £475

Target reached! Please pay your pledge amount into the Hackspace account with ref SHAPEOKO then add "paid" next to your name below.

Running total pledged: £585

Total paid: £505

Unconfirmed pledges

These pledges are probably out of date:

  • £20 - Chris Wilkinson
  • £20 - Antaeus Wheatley
  • £20 - David Walters

See also

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Pledge:_Shapeoko_2_-_desktop_CNC_full_kit&oldid=42549’