From London Hackspace Wiki
Revision as of 10:22, 22 January 2020 by Simon Hewison (talk | contribs) (start documenting project)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Created 21/07/2020
Members Welshie,

Thomas Greer, Michael Cullen, Mike Chislett,

QR code

To build and fit an E3D aerostruder hotend to one, or both of the Lulzbot Minis. The Aerostruder setup will allow printing with flexible filaments as well as rigid.


  • 3D printed parts created
  • Brass inserts applied
  • Extruder motor mounted
  • Extruder assembly mounted
  • Limit switch mounted

To Do

  • Finish wiring harness
  • Electrical testing
  • Fitting and alignments, change slicing profiles or E-Steps setting in Marlin firmware if necessary

Additional parts required

Du Pont crimp pins for wiring harness (Ordered Simon Hewison (talk) 10:22, 22 January 2020 (UTC) )