Project:Cholten99/TimeTravel
Jump to navigation
Jump to search
Time Travel Project
Potential Sketch
Major Stages
- Case
- Preliminary sketch created (DONE!)
- Design finalised
- Case materials purchased
- Case built
- Case 'polished'
- Dials
- Design finalised
- Components purchased
- Dials built
- Dials fixed into case
- Electronics
- Design complete
- Components purchased
- Circuit built
- Working in case
- Motor / gear system
- Design finished
- Components purchased
- System built into case
- Testing complete
- Sound effects
- Sound effects created (DONE!)
- Sound(s) recorded into chip
Case
Pilot Measurements
Bear measures 7"x8" base, 7" high and weighs ~300mg.
Prettifying
Electronics
Sequence
- Switch moved from position 1 to position 2
- Sound effect 1 starts on loop
- Meter activated
- Motor activated, forward
- Blue flashing light started
- Top microswitch activated
- Sound effect 1 stopped
- Sound effect 2 played once
- Meter deactivated
- Motor stopped
- Blue flashing light stopped
- Light changed from green to red
- Switch moved from position 2 to position 1
- Sound effect 1 starts on loop
- Meter activated
- Motor activated, backwards
- Blue flashing light started
- Bottom microswitch activated
- Sound effect 1 stopped
- Sound effect 2 played once
- Meter deactivated
- Motor stopped
- Blue flashing light stopped
- Light changed from red to green
Components
- Switch (got!)
- Meter (got!)
- Red / green LED (and housing)
- Blue LED (and housing)
- Blue LED flashing circuit components (556 timer)
- Motor
- 9v battery (and holder)
- 2 microswitches
- Chipcorder (for sounds)
- 16ohm speaker (for sounds)
Motor / Gear System
Sound Effects
Sound(s) found!