Project:Darkroom

From London Hackspace Wiki
Revision as of 19:47, 3 June 2013 by Montyphy (talk | contribs)
Jump to: navigation, search
The Dark/Bio Room

Status

Wyan is managing the move of the darkroom to the new space.

What is it?

A combined darkroom & wet room, ideal for photographers, biohackers, and other people who want to do dark, wet things. The initial goal is to get a small darkroom up and running suitable for black & white developing/printing/toning that's also usable as a mini-lab for biohacking experiments.

New suggested layout for the dark/bio room.
In the diagram to the right, you can see the wet working area is approximately the right side half of the room. There's a sink at one end. This bench is for all "wet work" – processing film and bio experiments. The left bench is the "dry area", with enlarger labelled on the far left corner. We will build storage shelves under the benches and above the sink. There will eventually be a fridge under the benches somewhere too. Shelves on the left hand wall are probably not reasonable as the depth of the bench makes it extremely difficult to access.

Where is it?

In one of the old bathrooms in Unit 23, next to the laser cutter.

What's the state of play?

So far, we have a sink mostly installed (still needs clips to pull it down around the edges and needs to be properly sealed) and it has running cold water. Eventually we might get hot water plumbed in as well, but right now it's completely usable in its current state.

We have FIVE sockets! All under the bench on the left side of the wall. Currently there's a 4way socket plugged into the single socket furthest into the corner. This runs along under the bench and pops out of the bench through a hole and generally should keep the electrical cables in the awkward, hard-to-reach corner and out of the way of working space.

We have a light switch on the inside of the room and a working lock (which is unlockable from the outside using a large flat-blade screwdriver in case of emergencies). The light switch and the door lock handle both have glow in the dark tape on it. This should be safe for most film purposes but generally keep your film away from it when loading it into the developing tanks (when we acquire these).

The room has been mostly blacked out. We've found we have a mini camera obscura under the left benches thanks to a random hole in the wall (probably for an overflow pipe). This actually lines up perfectly with the passing trains. Best viewed after being in the room with the lights off for 5minutes to get your eyes used to the dark and during a sunny day so the trains are well-lit.

Still on the To Do list:

  1. Organise and Document what we do have
  2. Run some test sessions & inductions to the dark/wet room.

Who's involved?

  • alexp pitched the project, but has no time to drive it any more.
  • Phil's helped out by building the benches and helping attach blackout curtain frames around the windows.
  • Nicholas helped clean out the room so we could see what's staying and what was just being stored in the room.
  • Paddy D's plumbed in a sink (wombled to us by Billy)
  • User:Atom is willing to help with building and equipment setup
  • bugs was very helpful in explaining a biohacker's needs for the room.
  • bluboxthief is willing to pick up donated equipment.
  • Others have wombled up some equipment already.
  • All volunteers welcomed.

Other interested people

  • Smfenn
  • Laura
  • datagramm
  • wyan: I'm not very often in the space these days, but would like to get involved in film photography again.

Shopping list

Photography

  • 6x measuring cylinders (We currently have two large 600ml and 1200ml measuring cylinders. Would be good to have 100ml and 45/50ml as well --Akki14 18:54, 20 February 2012 (UTC))
  • Chemical storage tanks/bottles for working solution (ideally burpable ones)

Biohacking

A biohacker should write this section.

Future Projects