Project:Edge-lit table signs

From London Hackspace Wiki
Revision as of 16:08, 12 June 2014 by CDave (talk | contribs) (Created page with "{{Project |name = Edge-lit table signs |created = May 2014 |version = 1.0 |members = CDave |status = revised files & documentation in progress |qrmode = 1 }} [...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
[[|Edge-lit table signs]]
Created May 2014
Version 1.0
Members CDave
Project Status revised files & documentation in progress
QR code
Wedding table Dinoshark.

We wanted to create illuminated table names for our wedding. Looking for ways to get this done was how I found the hackspace in the first place. I'm writing up the process in case any else wants a quick primer into how to do this.


How To




Enhanced Version

At one point we were looking at doing a two colour edge lit signs, but couldn't get a second LED strip in exact shade of the wedding colours.

Lessons learned

We also lit the seating chart like this, on three 300x600mm perspex sheets. Not nearly as impressive. Always run simulate before kicking off with LaserCut, it's got a couple of bugs.