Next Meetup: Monday 23rd July 2012. 6:30pm.
Planning the project, collecting materials and looking for hardware donations and volunteers / collaborators and new ideas.
To monitor and report on power usage in the workshop, and profile power usage on certain equipment. Extend this initial effort to develop lower cost energy monitoring with the eventual aim of, perhaps, more individual monitoring of devices or areas of the space i.e. per table or per large multibrick
A power monitoring and reporting interface that will take readings from the 3-phase workshop power and make it available on cacti and queriable through other means, EG board and board2. (Ask about how this should work)
Smart 8 way Power Sockets
Items for Milestone 1
- 3 CT Clamps (for 3 phase measurement) : http://openenergymonitor.org/emon/buildingblocks/how-to-build-an-arduino-energy-monitor-measuring-current-only
- Raspberry Pi (for making an interactive display out of the Samsung monitor in the hallway - this infrastructure would, no doubt, be shared with many other projects in time)
- FTDI Cable (for nanode programming)
- Nanode (for reading the CT clamps and connecting to the local network to send the data to Cacti)
Sending Messages to the Board
Basically make a GET request to a URL including the message you want to send. Try this in any browser in the hackspace (for the board above lovelace i.e. the boarded project on irc-cat cat commands): http://babbage:8020/Hello%20World!
Sending Data to Cacti
Can someone put some more info on this in here please, I don't know how to do this off the top of my head!
-The old workshop / 3 phase supply cupboard.
Meetups / Hacking Session
- 5pm Saturday 21/7/12
Global warming. And banks.
Connection Overview: Analogue======Connection Overview: Analogue
Connection Overview: CT Clamp Measurement Circuit
Connection Overview: Ethernet/Packets
Nanode for Energy Monitoring and Reporting to Cacti
- Test with a Nanode and some off-the-shelf CT clamps
- Solder Nanode Kit (in samthetechie's project box) following this build guide: http://wiki.london.hackspace.org.uk/view/Project:Nanode/Building_a_Nanode
- Rig up a CT clamp circuit from Open Energy Monitor
- Get in Touch with Glynn and Trystan from the Open energy Monitor Project for collaboration, advice and share project / ideas.
- Re-implement / Replace expensive CT clamps and Nanode with lower cost PICs and ferrite core / homemade CT clamps