Difference between revisions of "Project:Sanguinololu Thermocouple"
Jump to navigation
Jump to search
(→BoM) |
|||
| Line 95: | Line 95: | ||
== How to Build == | == How to Build == | ||
| + | Tools required: | ||
| + | *soldering iron | ||
| + | *solder | ||
<!-- some step by step, illustrated, instructions--> | <!-- some step by step, illustrated, instructions--> | ||
| + | |||
== Licence == | == Licence == | ||
This design is licensed under [http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ Creative Commons BY-NC-SA] | This design is licensed under [http://creativecommons.org/licenses/by-nc-sa/2.0/uk/ Creative Commons BY-NC-SA] | ||
This design is modified from [http://reprap.org/wiki/Sanguinololu_SD Sanguinololu SD] | This design is modified from [http://reprap.org/wiki/Sanguinololu_SD Sanguinololu SD] | ||
Revision as of 13:56, 8 November 2012
| [[|Sanguinololu Thermocouple]] | |
|---|---|
| Created | 03/11/2012 |
| Version | 1 |
| Members | Pinski1 |
| Project Status | Awaiting PCBs |
| QR code | |
Introduction
I wanted to add a thermocouple to my 3D printer's hot end. Ideally it would improve the quality of my printed objects as it would provide more accurate temperature readings with greater immunity from electronic noise generated by the stepper motors.
Features
The PCB I have designed has the following features:
- Fits onto the expansion headers already present on the Sanguinololu
- Adds a MAX31855 thermocouple to digital convertor chip
- Enables temperature readings between -200°C to +1350°C ±2°C
- Has a resolution of 0.25°C
- Can sample at 10Hz
Files
Schematics
Eagle 5.11 file:
PCB Layout
Eagle 5.11 file:
BoM
| Qty | Value | Ident | Description |
|---|---|---|---|
| 1 | TXB0104D | IC1 | SOIC14 Bi-Directional level translator chip |
| 1 | TPS73033DBVT | IC2 | Could be any SOT23-5 +3V3 voltage regulator |
| 1 | MAX31855K | IC3 | SOIC8 Thermocouple-to-Digital chip |
| 2 | 2.2uF | C1, C2 | Ceramic 1206 decoupling capacitors |
| 3 | 10nF | C3, C4, C5 | Ceramic 0805 decoupling capacitors |
| 1 | SV1 | 2x5 way, straight, 2.54mm, female header | |
| 1 | X1 | 2way, screw terminal, 5.08mm |
Pictures
| Top | Bottom | |
|---|---|---|
| The Eagle CAD layout. | ||
|
The Eagle CAD 3D render | |
|
|
The PCB renders of OSH Park |
| To come | To come | The delivered PCBs. |
How to Build
Tools required:
- soldering iron
- solder
Licence
This design is licensed under Creative Commons BY-NC-SA
This design is modified from Sanguinololu SD