Project:Sex typing with amelogenin

From London Hackspace Wiki
Jump to: navigation, search


The general plan, with thanks to Maria, is: obtain dna samples, extract dna, pcr dna with amelogenin primers, and then run that on agarose gel.

There is still work that could be done, checking the legals, ethics and safety. eg: [1] [2] [3]

I figure we try to arrive at a definitive list of stuff (bill of materials) we need for the experiment, and source the bits we still need, perhaps avoiding unnecessary multiple delivery charges.

There is also a need to figure out how long this will all take and schedule it. The overall duration from start to finish is going to be quite long.

It might help to try out some parts, such as the extraction, before hand, although I don't see how we know whether that works until we run it through the rest. We could practise making gels, running a ladder on them, to figure out mixtures and timings and practise with detecting the dye.


Current plan is to sterilise plastic sticks for consenting adult volunteers to rub inside their cheeks. Legally (I am so not a lawyer, and this is not legal advice), reading them a written spiel and getting their verbal agreement with witnesses and seeing them take the sample seems to be sufficient , although the suggestion has been made that a simple signed form might help avoid a possible problem with forgetful witnesses.

cotton swabs are another possible option.


There are a number of written protocols out there



and a few videos on youtube

This seems to be the typical hackers version [6] which is basically soap to lyse the cells and then meat tenderiser as a protease and separation using alcohol. Reagents are all commonly available, so seems safe enough. will this will work with PCR?

Katherine Aull was boiling hers to get lysis and denature the proteins.

do we also need to do DNA precipitation? [7] why?

The sampling and extraction are crucial steps if the following steps are to work. dna contamination can be amplified in the pcr stage. there is a suggestion that there is an amount of black art in getting this to work well. It might repay the effort to try several different extractions and run them side by side for comparison.


[8] File:Polymerase.pdf Media:DNA_Ladders.jpg Media:New_ladder.jpg

paper more-or-less at random, Eng 1994 where it gives:

PCR Amplification of the Amelogenin Locus The primers used to amplify the X and Y amelogenin sequences were previously described by Nakahori and colleagues [6]. The primer sequences are as follows: primer AMXY-1F (5'-CTGATGGTTGGCCTCAAGCCTGTG-3') primer AMXY-2R (5'-TAAAGAGATTCATTAACTTGACTG-3') PCR was conducted using the Perkin-Elmer GeneAmp | PCR System 9600 Thermal Cycler. Genomic DNA samples were amplified in a 100 txL reaction volume containing 0.2 mM of each dNTP, 50 mM KCI, 10 mM Tris.HC1 pH 8.3, 4.0 mM MgC12, 120 pmoles of each primer, and 2.5 U Taq polymerase. PCR was run for 30 cycles of 94~ for 1 rain (denature), 65~ for 2 min (anneal), and 72~ for 3 min (extend). Following amplification, the PCR products were analyzed by electrophoresis on 1.2% agarose gels run with 1 X TBE (89 mM Tris borate, 89 mM boric acid, 2 mM EDTA) or 6% nondenaturing polyacryl- amide gels run with 1 X TBE. The gels were stained with ethidium bromide and the fragments were visualized by fluorescence under ultraviolet light.

Andy suggests that we go with the instructions on our polymerase for the PCR.

S4438 (with SYBR green)[9]

D6442 (without)[10]

There is a question mark over whether we need a smaller pippette, or perhaps we can let out some solutions to use a larger volume. Katherine Aull was using syringes.

We need tubes for the thermal cycler.

We have SYBR green to replace the ethidium bromide.

Gel electrophoresis


Eng has

1.2% agarose gels run with 1 X TBE (89 mM Tris borate, 89 mM boric acid, 2 mM EDTA)

If our dye is SYBR Green I then we need blue light (λmax = 497 nm)

It seems we need to manufacture new electrophoresis equipment or has someone taken it to be repaired? I looked into the possibility of making the gel tray as a single bent piece, but the guys I know said they couldn't do it on 5mm acetate.

We are still looking for a better alternative to the copper electrode that gets eaten by the reagents.

It is common to run reference samples (ladders) alongside the samples, so as to see that weight of the sample. would also be handy to calibrate this process first. ladders can be bought, do we already have?

So, we need TAE or TBE for the buffer.

Tris Safety Data Sheet Boric Acid Safety sheet Example COSHH for PCR and gel electrophoresis with TAE


SafeView and SafeWhite are from NBS Bio. There are manuals and safety sheets there.

interesting doc about ethidium bromide disposal in th uk here: [11]

What we are looking for

We expect bands at X = 977 bp and Y = 788 bp

It seems that the lines at X=977bp are in different positions in the male and female lanes in the cybertory example. discuss.


Individuals with deletions such that this test doesn't work on them are extremely rare. So we hope to get correct results for all samples. We discussed blinding the samples to avoid possible bias in interpretation reading the gel, but if we can photograph the gel that could serve that purpose.

It might be nice to do video recording and a write up.

First gel run, Dec 7, 2011

On this date, we had not yet received our PCR tubes, so we were unable to do PCR. Instead, we decided to test our ability to do electrophoresis, using a DNA ladder and SafeWhite stain. We followed the following protocol:

* Agarose, added to buffer, microwaved. 1 gram of agarose to 100ml of tbe: 1% agarose mix will work for 0.4 to 7kb
* cool in a water bath set at 50-55c.
*  add 5 ul of ethidium bromide to gel if using ethidium bromide. If using safewhite add nothing yet
* Add gel to mold: cover sides with masking tape
* Add comb to gel
* Put in fridge for half an hour (or, basically: cool until completely set)
* remove comb.
* Place gel, with tray, in electrophoresis box.
* Fill electrophoresis box with TBE, to cover the gel.
* prepare sample: 5ul of ladder and 2 ul of safewhite (for the 6x solution)
* add sample to gel tray.
* electrophorese at 100v for 1 hour. Negative terminal closest to DNA
* Visualise under UV at 280-300nm.

The reference I used for this protocol:

Unfortunately we were unable to detect any green glow which would indicate that the DNA in the ladder had bound to the Safewhite.

We resolved to make the next test a simple visualisation test: combine ladder with Safewhite and attempt to visualise under UV.

SafeWhite test, Dec 9, 2011

Nicholas combined 2.5ul SafeWhite and 2.5ul DNA Marker-D. He was unable to make this mixture glow under UV.

Second gel run, Dec 13, 2011

Nicholas performed the same protocol as in the "First gel run, Dec 7, 2011", with the following changes:

* SafeWhite was not added.
* Two wells were loaded with 3ul of DNA Marker-D.
* After electrophoresis, the gel was cut in half, with one active well per half.
* One half was submerged in 0.002% methylene blue solution (in 0.1X TBE) for one hour.
* The other half was submerged in 0.001% gentian violet solution (in 0.1X TBE) for half an hour.
* No staining was observed.

3rd or 4th gel run, Jan 25, 2012

We successfully visualised a ladder using the following protocol:

Quantities of chemicals:

  • 1% TBE, 1 part "TBE 10x" to 9 parts water
  • Agarose, 1 gram per 100ml of TBE
  • Ethidium bromide stock solution, 1 gram of powdered EtBr per 100ml of TBE
  • 2ul of ethidium bromide stock solution per 40ml of agarose


  • 200ml of agarose: 2 grams of agarose powder to 200ml of 1% TBE solution
  • Microwaved the agarose, cooled to 50 degrees, added 10ul of ethidium bromide stock solution
  • Poured the agarose into a mould, trying to keep the gel as thin as possible. We ended up using about 100ml of agarose. Waited for agarose to cool.
  • Added 6ul of a newly-ordered DNA ladder into two wells.
  • Electrophoresed, 100 volts for half an hour (thereabouts -- power supply was current limited to 0.8 amps, so voltage dropped to about 80 volts as the electrophoresis progressed)
  • Visualised by placing a fluorescent tube with peak emission at 300 nm directly underneath the gel.

1st Feb 2012


8th Feb 2012


12th Feb 2012


15th Feb 2012


22nd Feb 2012


29th Feb 2012


1st March 2012


7th March 2012


11th March 2012




21st March 2012 : Success!!


22nd March 2012: Anti-success


More results

We've done several more tests since March 22, most of which seem to work. Summaries here The major problem seems to be quality of the extracted DNA: PCR product is frequently quite faint. As of April 26, 2012, DNA extraction technique will be the main focus for the amelogenin test (and for genetic testing of human DNA in general).

Complete protocol as of June 2012


  • Fill a PCR tube with 250 ul of 5% Chelex solution.
  • Scrape cheek cells using a pipette tip.
  • Stir the pipette tip in the Chelex so that the cells are transferred. Perhaps also spit down the pipette tip.
  • Incubate at 56 C for 30 minutes. Vortex for a few seconds. Incubate at 94 C for 10 minutes.
  • Centrifuge and take supernatant.


  • Use 12.5 ul of Taq master mix, 2 ul of each primer, 3 ul of template, and 5.5 ul of distilled water.
  • Initial denat. of 96 C for 5 minutes.
  • Then 30 cycles of D = 96 C for one minute, A = 54 C for 30 seconds, E = 72 C for one minute.


  • Prepare a 1% agarose gel using 1X TBE and 2ul / 40ml of ethidium bromide.
  • Add 1 part loading buffer to 5 parts sample
  • Electrophorese at between 80v and 100v for 30 to 60 minutes.


  • Wear glasses and long sleeves.
  • Visualise using a 300nm UV light held above the gel. View (or photograph) through an orange filter.

Future Work

Given that we get this working, it should provide a basis for further experiments. As far as I understand it, it is possible to apply this sort of technique, with appropriate primers, to do detection of SNPs [12] opening up the possibility of testing for something common like RHD or MC1R alleles, and perhaps providing a resource for people who want to genetically test themselves for rarer things a la Katherine Aull (but it is much simpler and cheaper to get such tests run commercially, and there is a difficult ethical case to answer about providing genetic testing without proper expert medical support and interpretation of results).

We can also test for nonhuman DNA, i.e. non-genetic diseases caused by viruses or bacteria; test the provenance of various foods (fish in general and sashimi in particular would seem like a good option); or attempt DNA fingerprinting to identify particular people (I haven't looked into this but would guess it involves a few different primers targeting highly-variable portions of the genome).