Project:Tool Access Control/Deployment
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is for keeping track of what we need to achieve, and how far along we are to achieving it.
Tools
| Name | Location | Maintainers | Number of Phases | Maximum current draw | ACNode fitting Location | MAC address | Status |
|---|---|---|---|---|---|---|---|
| Lulzbot | 3D Printer Corner | Thomas Greer | 1 | 5A | Inside the base | ? | In Service |
| Myford lathe | General workshop | Liam, AndyT | 1, | 13A max SSR | Toughened acnode | ? | Installed |
| Lasercutter | By the Window | Sol, Henry | 1 | Very little (interlock) | On the side | ? | In Service |
| Shapeoko | Robotics/CNC area | mentar, yopero, chris77uk | 1 | Very little, uses ATX PSU for 12V power | Inside electronics container | ? | Installed |
| Stratasys | 3D printer area | hipster | 1 | 13A max mains relay | Inside top compartment | ? | Installed |
| TIG welder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | In Service |
| MIG welder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Needs wireless solution | ? | Proposed |
| Grinding wheel 1 | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Grinding wheel 2 | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Donkey saw | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Grinder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Frontdoorbot | frontdoor | Jasper, Jasiek, etc... | n/a | n/a | buried in doorframe | 00:1A:B6:02:F3:FC | In Service |
| Backdoorbot | backdoor | Jasiek, Jasper etc... | n/a | n/a | box next to door | 00:1A:B6:02:F3:F5 | In Service |
| Back door | backdoor | cepmender, Welshie | box in ground floor CNC room with gel cell battery backup, acnode-shield v1 | In service testing, bugs with acnode vlan? Configured for Normally Open solenoid | |||
| Front door, actually for lift lobby to 1st floor | frontdoor | Welshie | box to be installed in 1st floor comms room, gel cell battery backup, acnode-sheild v1 | in construction, requires gel cell for battery backup. Configured for Normally Closed maglock |
Items in stock
3x Connected Launchpads 3x 40A SSRs 3x RFID Readers 0x RGB LED arcade buttons