Difference between revisions of "Project:UMI RTX Robot arm"
Jump to navigation
Jump to search
(Created page with " 6 DOF robot arm from 1986, Possibly being donated by Daithi. link dump * http://services.eng.uts.edu.au/~carlo/pdf/Hitsquad_Robot_Manual.pdf * http://itech.fgcu.edu/faculty/za...") |
Fridgehead (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | |||
6 DOF robot arm from 1986, Possibly being donated by Daithi. | 6 DOF robot arm from 1986, Possibly being donated by Daithi. | ||
| Line 7: | Line 6: | ||
* http://itech.fgcu.edu/faculty/zalewski/projects/files/RTX_Zabala_final2008.pdf | * http://itech.fgcu.edu/faculty/zalewski/projects/files/RTX_Zabala_final2008.pdf | ||
* http://itech.fgcu.edu/faculty/zalewski/projects/files/RTX_Zabala_Labview2009.pdf | * http://itech.fgcu.edu/faculty/zalewski/projects/files/RTX_Zabala_Labview2009.pdf | ||
| + | |||
| + | |||
| + | Update 29/08 | ||
| + | |||
| + | Tomw and tgreer tried to get this running but the z axis seems to be rusted to f***. The PSU outputs the correct voltages but when trying to put this into "green mode" it buzzes and sticks in red. | ||
| + | |||
| + | Checked fuses and theyre ok. | ||
| + | |||
| + | We forced the z-axis to try and break it out of any rusted stickiness and managed to move it down. We also tried 12-24v across the z axis motor and got no response | ||
| + | |||
| + | |||
| + | One of the fuses then blew which we replaced and promptly blew the 5 tantalum capacitors near the right hand connector on the main board. These will need replacing | ||
Revision as of 17:36, 29 August 2012
6 DOF robot arm from 1986, Possibly being donated by Daithi.
link dump
- http://services.eng.uts.edu.au/~carlo/pdf/Hitsquad_Robot_Manual.pdf
- http://itech.fgcu.edu/faculty/zalewski/projects/files/RTX_Zabala_final2008.pdf
- http://itech.fgcu.edu/faculty/zalewski/projects/files/RTX_Zabala_Labview2009.pdf
Update 29/08
Tomw and tgreer tried to get this running but the z axis seems to be rusted to f***. The PSU outputs the correct voltages but when trying to put this into "green mode" it buzzes and sticks in red.
Checked fuses and theyre ok.
We forced the z-axis to try and break it out of any rusted stickiness and managed to move it down. We also tried 12-24v across the z axis motor and got no response
One of the fuses then blew which we replaced and promptly blew the 5 tantalum capacitors near the right hand connector on the main board. These will need replacing