Silvertail A0 Laser Cutter

Silvertail A0 Laser Cutter
Model	Just Add Sharks Silvertail
Sub-category	CNC
Status	Good working order
Last updated	10 October 2022 18:00:37
Training requirement	yes
ACnode	no
Owner	LHS
Origin	Pledge
Location	Ground Floor
Maintainers	Solexious, Yetifiasco, Russ

Our shiny new laser cutter, purchased in 2014 by pledge.

• 1200mm by 900mm cutting area (A0 sized)
• 80W laser tube

If you're using this laser cutter for the first time, and you've been trained on the previous machine, please read the Upgrade Notes.

Training

You must not use the laser cutter without being trained. The laser cutter is unlikely to hurt you, but you can easily hurt it without training. For more information about laser cutter training, see the Lasercutter Training page.

Costs

• Training - Free
• Usage - £6/hour
• Consumables - Bring your own and/or use what is in the off cuts bin, but always ensure (rather than assume) it's laser safe.

Safety information

• Never leave the laser cutter unattended while cutting: your material may ignite, and an unchecked fire in the laser cutter could be both dangerous and costly. We've also seen mirrors go out of alignment and cut into the cables, This is what a laser cutter fire does to a laser cutter:

• In case of fire: use the CO₂ extinguisher by the laser cutter first. Do not use the powder extinguisher unless you feel that you can't control the fire. Put it in the logbook and tell the Mailing List: tiny flames while cutting are normal; anything more must be reported.
• Never cut PVC or chlorinated plastic: you should always know what material you are cutting, and chlorinated plastics should be avoided because they release chlorine gas when cut. Guidelines for how to test materials.
• You can't cut metal in the laser cutter: if you wish to mark the metal, please use Thermark / Cermark, or use anodised aluminium.

List of allowed and banned materials

Allowed

• MDF (up to 10mm)
• Plywood (Up to 10mm) Note: Denser/poor quality ply will have trouble cutting deeper than 4mm, use poplar or another less dense ply for 6mm
• Balsa wood
• Non-resinous wood IE hardwood (Engraving only)
• Paper (Cut only, don't engrave)
• Card/Cardboard
• Acrylic (up to 10mm)
• Foamcore (non-PVC variety)
• Anodized Aluminium (Engrave only)

Banned

• Food
• Body parts
• Plastics containing PVC
• Plastics containing ABS
• Fibreglass
• Glass
• Circuit boards
• Polycarbonate
• All metal (except anodized aluminium)

You should only be cutting materials on the Allowed list, if you want to cut a material which is not on this list, contact one of the trainers and get them to OK it first.

Trainers and maintainers

If you have questions or problems with the laser cutter, please speak to one of these people:

• Solexious (talk)
• Yetifiasco (talk)