Difference between revisions of "Silvertail A0 Laser Cutter/Cutting Parameters"
Jump to navigation
Jump to search
(added a corner power) |
(Added values for Polar Fleece) |
||
| Line 223: | Line 223: | ||
|800 | |800 | ||
|55 | |55 | ||
| + | |- | ||
| + | |Polar Fleece | ||
| + | |300 | ||
| + | |15 | ||
|- | |- | ||
|} | |} | ||
Revision as of 17:19, 9 March 2016
Cutting
Acrylic (Perspex)
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 2 | 50 | 100 | 80 |
| 3 | 30 | 100 | 80 |
| 4 | 20 | 100 | 80 |
| 5 | 15 | 100 | 80 |
| 6 | 10 | 100 | 80 |
| 10 | 5 | 100 | 80 |
Plywood
Birch
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) | Examples / Notes |
|---|---|---|---|---|
| 2 | 60 | 100 | 80 | |
| 3 | 55 | 100 | 80 | |
| 6 | 15 | 100 | 80 | |
| 9 | 10 | 100 | 80 | Test supervised by Russ, 28/01/2016, sample from "thenaturalworkshop" on eBay. Press-out cut, just barely penetrates, quite smokey. Borderline. |
Poplar/LitePly
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) | Examples / Notes |
|---|---|---|---|---|
| 3 | 60 | 100 | 80 | |
| 9 | 20 | 100 | 80 | Test supervised by Henry, 7/1/2016, sample from "thenaturalworkshop" on eBay. |
MDF
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 3 | 50 | 100 | 80 |
| 4 | 40 | 100 | 80 |
| 6 | 15 | 100 | 80 |
| 8 | 10 | 100 | 80 |
Foam board
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner power (%) | Examples / Notes |
|---|---|---|---|---|
| 5 | 50 | 25 | 23 | 6 passes* for a clean cut with minimal foam shrinkage |
| 5 | 80 | 25 | 23 | for a 50% score cut |
| 5 | 80 | 20 | 18 | for burning line markers/text into the paper coating |
(*) this needs to be retested since we are not supposed to make multiple passes over the same path
Card
Cardstock
| Weight (gsm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 300 | 100 | 35 | 28 |
Corrugated Cardboard
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 7 | 100 | 100 | 80 |
Acetate Sheets
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 0.1 | 100 | 17 | 17 |
Polar Fleece
| Thickness (mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| 2 | 100 | 35 | 30? |
Etching
Vary power/speed for different depths
| Material | Speed (mm/sec) | Power (%) |
|---|---|---|
| Anodized Aluminium | 1000 | 35 |
| Acrylic | 800 | 40 |
| Glass | 800 | 55 |
| Polar Fleece | 300 | 15 |
Outlining
| Material | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| Acrylic | 100 | 30 | 30 |
| Anodized Aluminium | 100 | 30 | 30 |
| Ply (light) | 100 | 20 | 15 |
| Ply (dark) | 100 | 40 | 35 |
| 6mm MDF | 100 | 40 | 35 |
| 6mm Acrylic | 100 | 40 | 35 |
Other Materials
We start to see issues with the machine when trying to cut with speed higher than 100. To cut thin stencil material it's better to use engrave instead cutting mode.
| Material | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| Correx 4mm | 30 | 100 | 80 |
| engrave coloured mount board 2mm | 200 | 30 | |
| Acetate |
| Polypropylene - 5micron (.5mm) | Speed (mm/sec) | Power (%) | Corner Power (%) |
|---|---|---|---|
| Cutting | 70 | 70 | 20 |
| scoring (for folds) | 100 | 30 | 20 |
| engraving | 800 | 40 |
Kerf
The kerf of 3mm acrylic at normal cutting speeds (35) is between 0.15 - 0.2mm.