Difference between revisions of "Silvertail A0 Laser Cutter/Logbook"

From London Hackspace Wiki
Jump to: navigation, search
(Logbook)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
 
==Logbook==
 
==Logbook==
 +
===28/09/2016 note by [[User:Solexious|Solexious]]===
 +
Reports of under powered, checked an was alittle, but not much. Checked alignment with no issues, alight bed miss alignment front to back. Cleaned optics, did test cut with no issues. Put back in order.
 +
 +
Bed needs clean asap, need to look at extraction tubes for slight repairs.
 +
 
===20/11/2015 note by [[User:Solexious|Solexious]]===
 
===20/11/2015 note by [[User:Solexious|Solexious]]===
 
Lens and mirror replaced, helped but tube output needed cleaning too. Done by Russ
 
Lens and mirror replaced, helped but tube output needed cleaning too. Done by Russ

Revision as of 18:10, 28 September 2016

Logbook

28/09/2016 note by Solexious

Reports of under powered, checked an was alittle, but not much. Checked alignment with no issues, alight bed miss alignment front to back. Cleaned optics, did test cut with no issues. Put back in order.

Bed needs clean asap, need to look at extraction tubes for slight repairs.

20/11/2015 note by Solexious

Lens and mirror replaced, helped but tube output needed cleaning too. Done by Russ

06/12/2015 note by Solexious

Smaller fan not outputting enough.

Kink in tube and blocked vent to blame. Cleared out. Best to stress to people not to let paper and card get sucked into the vents!