Silvertail A0 Laser Cutter/Logbook

From London Hackspace Wiki
< Silvertail A0 Laser Cutter
Revision as of 18:10, 28 September 2016 by Solexious (talk | contribs) (Logbook)
Jump to: navigation, search


28/09/2016 note by Solexious

Reports of under powered, checked an was alittle, but not much. Checked alignment with no issues, alight bed miss alignment front to back. Cleaned optics, did test cut with no issues. Put back in order.

Bed needs clean asap, need to look at extraction tubes for slight repairs.

20/11/2015 note by Solexious

Lens and mirror replaced, helped but tube output needed cleaning too. Done by Russ

06/12/2015 note by Solexious

Smaller fan not outputting enough.

Kink in tube and blocked vent to blame. Cleared out. Best to stress to people not to let paper and card get sucked into the vents!