Difference between revisions of "Silvertail A0 Laser Cutter/Upgrade Notes"

From London Hackspace Wiki
Jump to: navigation, search
(acnode rebuilt)
(Do not redefine the origin)
Line 12: Line 12:
 
* If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it.
 
* If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it.
 
* The Home is still the right rear
 
* The Home is still the right rear
* The Origin is now the left front (engineering norm). X axis towards the right, Y axis towards the back.
+
* The Origin is now the left front (engineering norm). X axis towards the right, Y axis towards the back. '''DO NOT REDEFINE THE ORIGIN''' - this will cause physical damage.
 
* Comm port settings should be set to auto and Hackspace laser  
 
* Comm port settings should be set to auto and Hackspace laser  
 
* Power levels might need a bit of adjustment. Do a test cut first.
 
* Power levels might need a bit of adjustment. Do a test cut first.

Revision as of 10:48, 14 March 2020

Work-in-progress.


Differences between stock Silvertail lasercutter with Lasercut53 software and current lasercutter set-up with smoothiware controller and Lightburn software

  • No need to download to the cutter
  • The equivalent of 'Run Box' to get the extent of your cut is the 'Frame' button.
  • Ignore the controls on the cutter itself. The LCD panel currently does nothing.
  • Z axis adjustment is via software on the PC, choose a smallish step size and keep pressing the up/down z axis buttons. Little steps take it easy!
  • Lightburn tutorials
  • If you E-Stop the lasercutter, you'll need to restart Lightburn to re-detect it.
  • The Home is still the right rear
  • The Origin is now the left front (engineering norm). X axis towards the right, Y axis towards the back. DO NOT REDEFINE THE ORIGIN - this will cause physical damage.
  • Comm port settings should be set to auto and Hackspace laser
  • Power levels might need a bit of adjustment. Do a test cut first.
  • ACnode has been rebuilt and re-located on the front-right of the laser cutter. Now de-powers the smoothieboard via relay.

Silvertail A0 Laser Cutter/Upgrade Notes from HPC to stock Silvertail