Difference between revisions of "Talk:Laser Cutter/Instructions/Photo Engraving"

From London Hackspace Wiki
Jump to: navigation, search
(Added links.)
Line 7: Line 7:
 
Why matching Resolution to ScanGap helps:
 
Why matching Resolution to ScanGap helps:
 
http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html%7C
 
http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html%7C
 +
 +
[[Used:CDave]] - I took out the links primarily because they pointed to non-existant blog posts, although the now one about dithering/burns is there now.
 +
Mostly though, I was detailing my experiences with our software and hardware and the different settings that I have experimented with thus far. And the page is not complete yet!

Revision as of 22:04, 2 June 2014

User:KantPredict Reverting edits is not a minor change.

The links you removed may be helpful to people working on photo realistic engraving:

Adding shades by clever dithering and burns http://blog.aaronbot3000.com/2013/05/a-guide-to-better-dithering-on-laser.html

Why matching Resolution to ScanGap helps: http://diylaser.blogspot.co.uk/2011/09/laser-engraving-and-dpi-scan-gap.html%7C

Used:CDave - I took out the links primarily because they pointed to non-existant blog posts, although the now one about dithering/burns is there now. Mostly though, I was detailing my experiences with our software and hardware and the different settings that I have experimented with thus far. And the page is not complete yet!